Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Basic Series 3-3/4 inch pull is a steel bow-style handle in the PRO Basics collection, so it provides a straightforward grip and consistent styling for cabinets and drawers across a project. The center to center measurement of 96 mm sets the hole spacing, which supports accurate drilling layouts and quick replacements on existing 96 mm installations. Its polished chrome finish reflects a bright, clean look, which helps match other polished chrome decorative hardware in the same space. The overall length of 4-1/2 inches gives full hand access on typical cabinet fronts, which helps users get a firm hold when opening heavier doors or loaded drawers. A projection of 1-1/16 inches stands the pull off the surface, giving finger clearance between the hand and the cabinet face. The 1/4 inch width keeps the profile slim, which works well where a clean, minimal appearance is wanted.
The 96 mm center to center measurement sets the distance between mounting holes, which allows installers to align drilling jigs or boring machines for repeatable placement along a run of cabinets. With an overall length of 4-1/2 inches, the pull extends slightly beyond the hole spread, which leaves some tolerance for small drilling variations while still covering the bore area. Its projection of 1-1/16 inches defines how far it stands off the door or drawer, which helps plan clearances near adjacent doors, walls, or tall cabinet frames. The 1/4 inch width keeps the footprint narrow on the face, which is useful when working around narrow rails or tight framing details on custom fronts. The specified 8-32 x 1 inch screw size interfaces with the pull, which sets expectations for thread type and length during cabinet front drilling and hardware prep.
This 96 mm center to center bow pull works within the PRO Basics collection, so it suits projects that call for coordinated decorative hardware across multiple rooms or cabinet runs. Its role as a handle in the Handles and Pulls category positions it for use on standard cabinet doors and drawers, giving users a consistent gripping point wherever access is needed. The polished chrome finish ties into other polished chrome elements, which helps create a unified look when paired with matching decorative hardware and moldings. With a length of 4-1/2 inches, it suits typical base and wall cabinet fronts, providing enough span for a stable grip without overwhelming narrower drawer faces. The 1-1/16 inch projection also helps when cabinets are close to appliances or tall panels, by defining how far the hardware extends into working aisles.
The specified 96 mm center to center spacing allows installers to standardize boring patterns across multiple cabinets, which saves layout time and keeps hardware lines straight across long runs. Knowing the projection is 1-1/16 inches lets planners coordinate door swing and drawer travel relative to nearby surfaces, which supports smoother operation in tight kitchen or shop layouts. The 1/4 inch width concentrates the load along a slim bar, which can visually balance narrow frame members or slab fronts when repeated across banks of drawers. The steel material gives installers a defined substrate for fastening through the 8-32 x 1 inch screw size interface, which provides a known thread pattern when preparing fronts. Being part of the PRO Basics collection also helps maintain a consistent design language, which matters when replacing existing pulls from the same family on partial remodels.
The pull has a 96 mm center to center hole spacing, a 4-1/2 inch overall length, a 1-1/16 inch projection, and a 1/4 inch width, which define drilling layout and on-door clearance.
The pull is made from steel with a polished chrome finish, which creates a solid-feeling handle with a bright surface that coordinates with other polished chrome decorative hardware.
The 96 mm center to center size sets a standard hole spacing, which supports using jigs or boring patterns for consistent placement across multiple cabinet fronts.
The pull is specified with an 8-32 x 1 inch screw size interface, which informs thread choice and length when preparing cabinet doors and drawers for mounting.
The pull belongs to the PRO Basics collection in the Pro Value Series, which supports consistent styling when using related decorative hardware on the same project.
The 4-1/2 inch overall length suits standard cabinet doors and drawers, giving users enough grip area while keeping the hardware proportional on common cabinet front sizes.
The 96 mm center to center bow pull in polished chrome brings together a steel construction, PRO Basics collection styling, and defined dimensions, so it fits cabinet projects that rely on repeatable drilling patterns and coordinated decorative hardware. Its 4-1/2 inch length, 1-1/16 inch projection, and 1/4 inch width balance hand clearance with a slim look on doors and drawers. For runs where a polished chrome finish and consistent Pro Value Series hardware matter, this SZBOW96-PC pull offers a clearly specified option that aligns with standard cabinet layouts.