LUXE bar pull 320mm black describes a steel handle from the PRO LUXE SERIES that provides a straight bar grip for drawers and cabinet doors, giving a consistent handhold wherever you install it across a run of casework. The 12-5/8 inch center to center dimension matches 320 mm drilling, so it drops onto metric layouts without layout changes on new or existing fronts. A 15 inch overall length gives plenty of grab area across wider fronts, which helps when operating heavier drawers or tall doors. The 1-1/4 inch projection spaces the bar off the face, creating finger clearance while keeping the pull close enough to reduce snagging in tight traffic paths. A 1/2 inch width keeps the profile slim, which works well on modern slab fronts while still giving enough surface for a solid grip.
The 320 mm center to center drilling dimension defines the mounting hole spread, so installers can bore clean, straight runs using metric jigs without custom spacing. With a 15 inch length, the bar extends slightly past the mounting points at each end, which visually centers the hardware on wide faces while leaving clearance at panel edges. The 1-1/4 inch projection sets the standoff depth, so fronts can open without knuckles hitting the surface. A 1/2 inch width keeps the pull narrow front-to-back along the face, which helps it sit neatly on rails or thinner face frames. Together, these dimensions support consistent alignment on both drawers and doors in the same project.
This PRO LUXE SERIES bar pull sits in the Handles and Pulls class from Berenson, so it is suited to cabinet and drawer fronts where a linear grip is preferred. The 320 mm center to center size lets it line up with wide drawers or tall doors that benefit from a long, continuous handle along the front. Its 15 inch length makes it a good fit for wide kitchen or vanity drawers where more grab area helps with heavier loads. The 1-1/4 inch projection and 1/2 inch width keep it compact enough for upper cabinets while still matching lower units, which supports a single hardware style across mixed cabinet sizes. The black finish pairs with a range of front colors, allowing the same pull to run through kitchens, baths, or shop cabinetry while maintaining visual continuity.
The 320 mm center to center measurement controls drilling, so once that spread is set on a jig the same layout can repeat across every front, reducing rework from misaligned holes. The 15 inch length gives a predictable overhang past the mounting points, creating consistent edge clearances when handles are centered or aligned with drawer tops. With a 1-1/4 inch projection, doors and drawers gain enough finger room to pull straight without twisting the wrist, which is helpful on frequently used base cabinets. The 1/2 inch width means the bar does not crowd narrow rail sections, allowing hardware locations that respect panel proportions even on smaller fronts. The steel construction keeps the pull feeling solid at the fastener points, which supports a tight, stable installation on both framed and frameless cabinets.
This bar pull has a 320 mm center to center dimension, which sets the hole spacing and aligns with metric boring patterns for cabinets and drawers.
The bar pull is 15 inches long, so it spans a wide section of the cabinet or drawer front and offers a generous gripping area across larger faces.
The bar pull has a 1-1/4 inch projection, providing space between the handle and the door or drawer front for comfortable finger clearance.
The bar pull is 1/2 inch wide, giving it a slim profile that works well on modern cabinet designs and narrower rails or stiles.
This 320 mm center to center bar pull is made from steel, giving it a firm, rigid feel when mounted on cabinet doors and drawers.
The SZLUXEBAR320-BL bar pull has a black finish, creating a defined contrast line that suits many cabinet colors and styles.
The PRO LUXE SERIES SZLUXEBAR320-BL bar pull combines 320 mm center to center drilling, 15 inch length, 1-1/4 inch projection, and 1/2 inch width to support consistent cabinet layouts. The steel construction and black finish align with modern installs where a straight, substantial grip is preferred. Matching these dimensions to your drilling pattern and front sizes lets you standardize on one handle style across drawers and doors, keeping projects visually aligned while using a known, repeatable hardware format.
Sold In: 1 Each