PRO LUXE bar pull describes a steel handle from the LUXE Bar Pulls collection that is built for decorative cabinet and furniture use, so installers can match multiple openings with a consistent look. The brushed nickel finish provides a neutral metallic tone that works across many cabinet colors while giving a clean, modern style. The center to center length of 384 mm sets the drilling pattern, so hole locations align accurately on wider drawer fronts or doors. The overall length of 17-1/2 inches gives a substantial grab area, which helps when operating larger fronts or heavier drawers. A projection of 1-1/4 inches creates hand clearance between the bar and the face, supporting a comfortable pull motion. The 1/2 inch width keeps the profile slim while still giving enough surface to grip. The screw size of 8-32 x 1 inch matches common cabinet boring, helping straightforward mounting in standard material thicknesses.
The 384 mm center to center drilling requirement positions the screw holes at a fixed distance, so jigs or CNC programs can be set precisely for repeat runs. The 17-1/2 inch overall length means the bar extends past the screw locations on both sides, so alignment is read visually along the full handle when squaring it to door or drawer edges. The 1-1/4 inch projection determines how far the pull stands off the face, so installers can coordinate with adjacent hardware or wall surfaces. The 1/2 inch width affects how the handle sits on narrow rails or drawer fronts, helping plan where to place it for both grip and clearance. The 8-32 x 1 inch screw size interfaces with standard cabinet boring, allowing the pull to be secured into typical panel thicknesses found in many shop-built and manufactured cabinets.
The 384 mm center to center dimension positions this LUXE Bar Pulls model for layouts that use wider or taller drawers and doors, where a compact handle would look undersized. The 17-1/2 inch overall length lets the bar span a significant portion of the front, so the pull becomes a strong horizontal or vertical design line on banks of cabinets. The brushed nickel finish works as a versatile surface across many stains and paints, so the same handle can be used from kitchen bases to upper cabinets and storage pieces. The steel construction gives the pull enough mass to feel substantial when opening large fronts, which suits installations in busy kitchens, offices, or shop storage. The 1/2 inch width keeps the handle visually lean, so it does not overpower narrow rails even when the length is extended. Together, these details position the pull as a good fit wherever a long, continuous bar look is desired on face frames or frameless cabinets.
The precise 384 mm center to center measurement lets installers set up drilling templates once, then repeat the pattern across a full project, which helps maintain straight, level hardware lines. The 8-32 x 1 inch screw size matches a standard thread and length, so the fastening interface behaves predictably when tightening into common cabinet materials. The 1-1/4 inch projection keeps the gripping point away from the cabinet face, which helps preserve finished surfaces from casual contact during regular operation. The 1/2 inch width gives a defined gripping edge, so hands can catch the bar reliably from different angles. The 17-1/2 inch overall length makes minor placement variances less noticeable, because the handle aligns by eye along a larger span. Being part of the LUXE Bar Pulls collection, this model supports consistent style and dimensions across multiple openings, which simplifies layout decisions and reduces rework on large runs.
The pull has a 384 mm center to center drilling, a 17-1/2 inch overall length, a 1-1/4 inch projection, and a 1/2 inch width, which together define drilling layout and hand clearance.
The brushed nickel finish provides a muted metallic look that pairs with many cabinet colors, helping one pull style work across different rooms and bank configurations.
The pull is made from steel, giving a solid, weighty feel in hand that stands up to repeated door and drawer use in residential or commercial environments.
The 384 mm center to center value sets exact hole spacing, allowing drilling jigs or CNC programs to be set once for accurate, repeatable mounting across many fronts.
The 1-1/4 inch projection creates space between the bar and cabinet face, providing comfortable finger clearance and reducing contact with finished surfaces during operation.
This bar pull uses 8-32 x 1 inch screws, matching a common cabinet hardware standard so the handle fastens securely into typical door and drawer materials.
The combination of a 384 mm center to center drilling pattern, 17-1/2 inch overall length, and 1-1/4 inch projection positions this PRO LUXE bar pull as a strong option for wider fronts that need a substantial handle. The brushed nickel finish and steel construction support use across kitchens, offices, and storage pieces while maintaining a consistent look. When a project calls for a long, slim bar pull with defined dimensions from the LUXE Bar Pulls collection, this model delivers a clear, repeatable spec to build into shop drawings and installation plans.
Sold In: 1 Each