PRO LUXE Bar Pull 256 mm describes a steel handle from the PRO LUXE SERIES that uses a 256 mm center to center drilling, so installers can match it to cabinets or furniture laid out for that common hole spacing. The bronze with highlights finish on this LUXE Bar Pull adds a warm metallic look that suits decorative hardware applications where a visible handle becomes part of the design. The pull length of 10-1/16 inches corresponds to the 256 mm center to center dimension, giving you a long, continuous grip along the front of doors or drawers. A total overall length of 12-7/16 inches means the pull extends beyond the mounting holes enough to clear door edges and provide hand clearance. Being part of the Decorative Hardware & Moldings handles and pulls category places it directly in typical cabinet, vanity, and casework use.
The 256 mm center to center measurement on this LUXE Bar Pull defines the drilling pattern required, so fabricators can bore or route mounting holes to that exact spacing for a proper fit. With an overall length of 12-7/16 inches, the pull positions its ends beyond the holes, which provides visual balance and a clear gripping section when mounted. The 1-3/8 inch projection determines the standoff from the cabinet face, creating working space behind the bar so fingers can wrap the pull without rubbing the surface. A bar width of 1/2 inch sets the contact area for the hand, giving a slim yet tangible edge that feels defined when grasped. The screw size specification of 8-32 x 1 inch describes the thread and length interface at the mounting points, aligning with common cabinet drilling and fastening practices.
This PRO LUXE SERIES bar pull sits within the Decorative Hardware & Moldings handles and pulls category, placing it in cabinet, furniture, and casework projects that call for a visible handle. The center to center distance of 256 mm ties it to layouts using metric drilling on wider drawers or doors, giving installers a match when upgrading or standardizing hardware. Its 10-1/16 inch functional span across the face makes it suited to larger fronts where a longer gripping area improves leverage. With an overall 12-7/16 inch length, the pull visually anchors broader faces, which helps keep proportions balanced on tall pantry doors or deep drawers. The bronze with highlights finish positions it for designs that favor warm metal tones instead of cooler finishes.
The defined 256 mm center to center drilling on this LUXE Bar Pull allows repeatable hole spacing across a run of cabinets, supporting straight sightlines when multiple pulls align. Its 1-3/8 inch projection establishes a consistent stand-off dimension, so doors and drawers across a bank share the same hand clearance and visual shadow line. The 1/2 inch width of the steel bar keeps the profile slim, which helps multiple pulls line up without feeling bulky on closely spaced drawers. The steel material contributes a solid feel at each mounting point, which matters when doors and drawers are operated repeatedly over time. By using a bronze with highlights finish, the handle delivers a specific color reference, helping designers repeat the same tone across different cabinet zones or rooms.
This PRO LUXE SERIES bar pull uses a 256 mm center to center dimension, which sets the drilling distance between mounting points for alignment with metric-based cabinet layouts.
The LUXE Bar Pull has a 10-1/16 inch functional length with a 12-7/16 inch overall length, giving broad coverage on wider drawers or doors and a visually anchored handle span.
The handle is made from steel with a bronze with highlights finish, combining a rigid bar body with a warm metallic tone that coordinates with similar bronze decorative hardware.
The LUXE Bar Pull projects 1-3/8 inches from the mounting surface, creating space behind the bar so fingers can grip without contacting the cabinet face during operation.
The bar width is 1/2 inch, providing a slim profile that delivers a defined gripping edge while keeping the handle visually light across multiple doors and drawers.
This bar pull is specified with 8-32 x 1 inch screw size, aligning with common cabinet hardware threading and helping match typical door and drawer front thicknesses.
The PRO LUXE Bar Pull 256 mm center to center dimension lets you line up with cabinets drilled on this metric spacing, simplifying layout on wider drawers or doors. With its 12-7/16 inch overall length, the pull spans larger faces for both grip and proportion. The 1-3/8 inch projection and 1/2 inch width define a consistent hand feel and profile across a bank of fronts. The steel construction and bronze with highlights finish connect structure and appearance for decorative hardware work. For cabinet and furniture projects using the PRO LUXE SERIES look, this LUXE Bar Pull provides the specified size and finish for a coordinated install.
Sold In: 1 Each