Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf RUKD waste pullout delivers a single 32 quart grey bin behind a base cabinet door, riding on a full-extension chrome carriage that makes the bin fully accessible without digging into the back of the cabinet.
A trash bin pushed into a base cabinet is easy to ignore until it overflows, because getting to it means crouching and reaching into a dark opening. This pullout solves that by sliding the bin completely out into the aisle on full-extension slides, so loading, emptying, and swapping a bag are all done at the front of the cabinet rather than at the back. The single-bin configuration keeps the footprint tight, which is the right call for a cabinet run where a double-bin unit would not leave room for adjacent storage.
The carriage is chrome, which contrasts cleanly with the grey bin and holds up in a cabinet environment that sees regular pulling and pushing. The 32 quart grey bin fits the footprint of a 14-1/2 inch wide carriage and handles typical household or light commercial waste volume without needing to be emptied every day. The bottom-mount configuration places the slide hardware under the bin rather than alongside it, leaving the bin's full depth available and keeping the mechanism out of the way when loading. This unit uses a standard, non-soft-close slide; the motion is direct and firm rather than damped.
This pullout is a practical fit in a kitchen where the waste cabinet is 14-1/2 inches wide or wider, whether that is a dedicated trash cabinet, a converted base cabinet in an island, or a prep area that needs a hidden bin close to the work zone. Cabinet shops specifying waste hardware for a production run will find the RUKD series straightforward to install and consistent across a standard base-cabinet lineup. The grey bin is a neutral that reads well in both white and darker cabinet interiors. This unit does not include a door-mount bracket, so the bin pulls out independently rather than riding on the cabinet door.
The cabinet opening must be at least 14-1/2 inches wide, 20 inches tall, and 16-1/2 inches deep. Measure all three before ordering, since the depth requirement is easy to overlook in a shallow run.
Yes. One 32 quart grey bin ships with the carriage. If you need a replacement bin later, Rev-A-Shelf sells bins separately.
No. This carriage does not include a door-mount bracket, so the bin rolls out on its own slides rather than moving with the door. If you want a door-linked pull-out, look for a RUKD configuration that includes a door-mount kit.
No. The RUKD-1432RB-1 uses a standard slide without soft-close damping. The motion is straightforward full-extension without end-of-travel deceleration.
Choose this pullout when the job calls for a chrome, full-extension single-bin unit in a 14-1/2 inch base cabinet, with a 32 quart grey bin already in the box.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RSRUKD-1420RB-1 Mfr# RUKD-1420RB-1 | Rev-A-Shelf RUKD 14-1/2" Chrome Bottom Mount Waste Pullout with 1-20 Quart Grey Bin Standard, RUKD-1420RB-1 | ||||
Sold in: 1 Each |  RSRUKD-820-1 Mfr# RUKD-820-1 | Rev-A-Shelf RUKD 8-5/8" Chrome Bottom Mount Waste Pullout with 1-20 Quart Grey Bin Standard, RUKD-820-1 | ||||
Sold in: 1 Each |  RSRUKD-932-1 Mfr# RUKD-932-1 | Rev-A-Shelf RUKD 9-3/8" Chrome Bottom Mount Waste Pullout with 1-32 Quart Grey Bin Standard, RUKD-932-1 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RS5WB-DMKIT Mfr# 5WB-DMKIT | Rev-A-Shelf 1-1/2" x 2-1/8" x 8" Door Mount Kit, Metallic Silver, 5WB-DMKIT |
