Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
56mm x 23mm No. 20 joining plate identifies this Lamello part as a standard No. 20 biscuit sized at 56mm long by 23mm wide, so installers can match it to cutters and slots already set up for this format. The Lamello brand places this joining plate in a well-known biscuit system, which helps maintain consistent joint geometry when working across multiple projects. Being a biscuit in the fasteners category positions it as a hidden wood joint connector, allowing clean surfaces without exposed mechanical fasteners. The biscuit classification means it is designed to sit in matching slots cut into mating parts, pulling the joint into alignment during glue-up. The No. 20 designation gives a clear reference point in the Lamello lineup, helping shops standardize on one biscuit size for repeatable cabinet and furniture assemblies.
The 56mm length of the No. 20 joining plate spans a substantial portion of the joint line, which helps stabilize alignment when parts are brought together under clamping pressure. The 23mm width defines the required slot profile, so once the cutter is set for this size, repeating the same joint across panels or frames becomes a straightforward, predictable step. As a biscuit classified fastener, this Lamello joining plate is intended to sit flush inside the machined slot, keeping the joint internal to the material while the outer faces stay ready for finishing. The No. 20 identification gives shops and installers a clear size label to coordinate with drawings, cut lists, and machine setups.
The 56mm x 23mm No. 20 joining plate fits projects that specify a No. 20 biscuit, aligning with slots sized to receive a biscuit of these dimensions. As part of the biscuits product class in fasteners, it is suited to wood joints where internal reinforcement is preferred over exposed mechanical connectors. The Lamello branding and part number 144020 identify it as a defined component in a biscuit-based system, which supports its use in cabinet work, furniture assemblies, or panel alignment that call for a standard No. 20 joint. The No. 20 naming keeps the fit consistent wherever that specification appears on shop drawings or cut sheets.
The 56mm length of this Lamello joining plate gives each biscuit a predictable engagement zone along the joint, which supports even glue spread and stable registration when bringing two boards together. The 23mm width determines the slot size required in each mating piece, so once tooling is set for a No. 20 biscuit, the same setup can carry across many identical joints without reconfiguring dimensions. Being defined as a biscuit within the fasteners category, this joining plate works as a concealed connector that aligns parts from the inside, which helps maintain clean outer faces ready for edging or finishing. The specific No. 20 designation and part number 144020 tie these dimensions to a repeatable standard, which supports consistent results when replacing or extending runs of existing No. 20 joints.
The Lamello 56mm x 23mm No. 20 joining plate measures 56mm in length and 23mm in width, so it matches joints and slots laid out for a standard No. 20 biscuit format.
The No. 20 designation defines a specific biscuit size, so joint layout and slotting can follow a known standard that aligns with 56mm x 23mm biscuits in shop plans.
The 144020 joining plate is listed as a biscuit in the fasteners category, so it functions as a concealed wood joint connector set into routed or machined slots.
The No. 20 wood biscuit, sized at 56mm x 23mm, is suited to woodworking joints that call for a standard biscuit format, such as panel alignment or frame assemblies.
The 56mm length and 23mm width give each biscuit a defined engagement area, which helps pull mating parts into consistent alignment when glued and clamped.
The Lamello brand connects this No. 20 biscuit to a recognized biscuit joining system, which supports coordination between the joining plate, slot dimensions, and related tooling.
The Lamello 56mm x 23mm No. 20 joining plate gives shops a clearly defined biscuit size anchored by part number 144020, which helps organize inventories and work orders around a standard No. 20 joint. By using a biscuit categorized fastener with specified 56mm by 23mm dimensions, installers can align machining, glue-up, and assembly steps to one consistent format. For cabinet, furniture, or panel work that calls out a No. 20 biscuit, this joining plate offers a precise reference so layouts, slots, and joints track the same Lamello standard from planning through final assembly.
Sold In: 1000 Each