Floating Shelf Brackets Black - Rangine Corp Rakks BS-036B

Floating Shelf Brackets Black For Clean Modern Runs

Floating Shelf Brackets Black from Rangine Corp/Rakks provide a suspended bracket solution that delivers exceptionally strong, low profile support, so installers can create clean, modern shelf runs without visible hardware dominating the wall. The BS-036B bracket is designed for 3/4 inch thick wood shelves up to 12 inches deep, which sets a clear working envelope when planning shelf material and projection off the wall. Invisible hardware support keeps attention on the shelf and contents, which is valuable in residential and commercial spaces where sightlines matter. When properly installed these brackets can support static loads up to 25 pounds per foot, giving you a defined capacity to work within when laying out book, display, or storage loads. The black finish keeps the bracket visually quiet behind the shelf, which supports a concealed look while maintaining strong, rigid support across the 36 inch length.

Key Floating Shelf Bracket Details That Matter

• The suspended bracket design provides exceptionally strong, low profile support, so shelves stay visually light while still carrying significant static loads across the span.
• Invisible hardware creates a clean, modern look, which is important when shelves are installed at eye level or in open-plan spaces where exposed brackets would distract.
• Design for 3/4 inch thick wood shelves up to 12 inches deep defines the shelf stock and depth that pair correctly, helping plan projects around standard material sizes.
• Static loads up to 25 pounds per foot give a clear loading guideline, helping installers and clients understand how the shelf can be used for books, decor, or storage.
• Pre-drilled and countersunk mounting holes set 16 inches on center line up with studs, simplifying layout and allowing the bracket to tie directly into typical wall framing.
• All mounting screws are provided, so installers can proceed directly to layout and fastening without sourcing separate fasteners for the bracket installation.

Installation Characteristics Of The BS-036B Bracket

The BS-036B floating shelf bracket uses pre-drilled and countersunk mounting holes, which position the screw heads flush and keep the bracket tight to the wall surface during installation. The holes are located 16 inches on center to line up with studs, so layout aligns with standard wall framing and reduces extra measuring when you are spanning multiple bays. The 36 inch length distributes static loads up to 25 pounds per foot along the wall, which helps spread forces into several stud locations when the bracket is fastened at each point. Design for 3/4 inch thick wood shelves up to 12 inches deep focuses the fit around common shelf dimensions, which simplifies material selection on both new work and retrofit projects.

Using This Rakks Floating Bracket In Real Projects

Where This Suspended Shelf Bracket Performs Best

The BS-036B suspended bracket from Rangine Corp/Rakks is built for 3/4 inch thick wood shelves up to 12 inches deep, so it fits typical shelving material used in closets, offices, and living areas. Its low profile support makes sense wherever a clean, modern look is a priority, because the bracket sits behind the shelf and keeps the hardware out of sight. The 36 inch length works well for single-shelf runs or as a repeating module in longer walls, giving installers a predictable segment to design around. With static load capacity up to 25 pounds per foot when properly installed, the bracket can handle books, decor, or light storage within that range, which helps match shelf use to the rated performance. The black finish helps the bracket disappear in shadow lines beneath the shelf, supporting the invisible hardware intent in both light and dark wall schemes.

Details That Support Repeatable Floating Shelf Results

Pre-drilled and countersunk mounting holes located 16 inches on center give a consistent layout pattern that speeds repeat installations, because the bracket aligns with standard stud spacing across different rooms. Countersunk holes keep screw heads below the bracket surface, letting the shelf sit properly without interference and helping the bracket bear evenly against the wall. The clearly defined support for 3/4 inch thick wood shelves up to 12 inches deep sets a reliable geometry, so drilling shelf pockets or routing channels can follow the same dimensions from job to job. Static load capability of up to 25 pounds per foot provides a quantified limit, which simplifies conversations with clients about what the shelf is intended to hold. As a low profile, suspended bracket within the Floating Shelves and Concealed Brackets product class, the BS-036B offers a consistent platform when building a series of matching shelves across a project.

Common Questions About The BS-036B Floating Bracket

Select The BS-036B For Clean Floating Shelf Runs

The Rakks BS-036B suspended bracket in black offers exceptionally strong, low profile support for 3/4 inch thick wood shelves up to 12 inches deep, giving a defined platform for floating shelf layouts. With invisible hardware and a 36 inch length rated for static loads up to 25 pounds per foot when properly installed, it supports both appearance and performance in a single component. Pre-drilled, countersunk mounting holes at 16 inches on center align with studs, which streamlines installation on typical framed walls. For projects calling for modern, hardware-free shelf lines built on known capacities, this Floating Shelf Brackets Black model gives a clear, job-ready option.