Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding 20620 Beige High Gloss provides a finished edge on panels where a beige, high gloss look is required, so exposed board edges match the surface visually and present a uniform appearance on completed work. This edge banding is produced by Doellken Woodtape in a PVC construction, so it is suited for edgebanding and surfacing applications in the woodworking industry where PVC edging is standard. The 15/16 inch dimension covers typical panel thickness with slight overhang, allowing trimming back to a precise, flush edge on cabinets or casework. The 1mm width gives a substantial edging profile, supporting a solid feel at the edge while still working within typical edgebander setup ranges. Supplied in a 300 foot roll, it supports longer production runs or multiple small jobs from one roll, helping reduce changeovers during edgebanding operations.
This beige high gloss edge banding uses a 15/16 inch dimension to cover the edge of standard panels, giving enough material for precise trimming while avoiding excess waste during setup and cutting. The 1mm width works with edgebanders designed around typical PVC edgebanding sizes, so feed settings, pressure rollers, and trimming stations can be adjusted within familiar ranges for repeatable results. On straight edges, the combination of 15/16 inch coverage and 1mm width allows a balanced cut where the high gloss surface runs flush with the panel face, supporting clean seams that visually blend with the adjoining surfaces. Across a run of parts, the consistent sizing helps maintain alignment from piece to piece, reducing rework due to mis-sized edging.
As a PVC edge banding in beige high gloss, this product is suited to edging panels where a matching beige, high gloss surface is already specified, such as casework, cabinetry, or furniture built around light-toned, reflective finishes. The product sits in the Edgebanding & Surfacing category, so it fits tasks focused on closing open panel edges to protect core materials and visually extend the surface finish around the perimeter. The 15/16 inch dimension allows use on standard thickness boards found in many cabinet and furniture builds, which keeps layout straightforward when planning part sizes and tape runs. With 300 feet available on a single roll, a shop can handle a complete project such as a small kitchen, bank of casework, or series of furniture pieces while using one consistent color and gloss level throughout.
The 15/16 inch dimension on this Doellken Woodtape edge banding gives coverage beyond the panel thickness, so trimming operations can bring the edge down flush, which helps keep the beige high gloss face uninterrupted along the joint. The 1mm width provides a defined but manageable profile, giving edging that is noticeable enough to protect the board edge yet still streamlined for modern cabinet lines. Being PVC edge banding, the material matches processes already used for PVC in many shops, so cutters and edgebander tooling sized for PVC can be applied without changing the fundamental workflow. The 300 foot roll length also supports consistent results over time because the same color, finish, and thickness continue across all pieces in the run, helping maintain alignment between doors, drawer fronts, and carcass parts on an installation.
Edgebanding 20620 Beige High Gloss is specified at 15/16 inch in dimension and 1mm in width, giving coverage for standard panel edges with a 1mm thick edging profile along the side.
The 20620GG-B-1540-300 edgebanding is a PVC edge banding with a beige high gloss finish, so it aligns with PVC edgebanding processes and matches beige, high gloss panel surfaces.
The beige high gloss edge banding is supplied in a 300 foot roll, supporting longer production runs or multiple smaller jobs while keeping color and thickness consistent across all components.
This beige high gloss PVC edge banding is used on panel edges in cabinetry, casework, or furniture projects that call for a beige, high gloss look across both faces and edges.
The 1mm width creates a defined but manageable edging profile, giving a solid feel along the edge while maintaining a streamlined look on cabinets and furniture panels.
Doellken Woodtape produces this PVC edge banding for the Edgebanding & Surfacing category, so it aligns with established woodworking industry expectations for PVC edging products.
Edgebanding 20620 Beige High Gloss from Doellken Woodtape combines PVC construction, a beige high gloss finish, 15/16 inch coverage, and 1mm width to match common panel work in the Edgebanding & Surfacing category. The 300 foot roll length supports efficient runs where the same color and gloss need to carry across all edges in a project, which helps keep finished pieces visually aligned. For panel work calling for beige high gloss surfaces with PVC edging, this product provides the specific dimensions and material profile needed to integrate into established edgebanding workflows.
Sold In: 300 Lineal Ft