Mission chamfered island column describes this 36 x 5 x 5 cherry column from the Pro Value Series and sets up a clean, structured support for island and cabinet designs that call for simple straight lines rather than turned profiles. The 36 inch length positions this column well for island or cabinet layouts that need a substantial vertical element without reaching full-height posts, which helps when working around standard counter heights or lower decorative runs. The 5 inch by 5 inch cross section establishes a broad face that reads as a solid structural presence in a kitchen or woodworking project while also giving ample surface for alignment against panels or face frames. Being part of the Columns product class in Decorative Hardware & Moldings keeps this piece focused on visible, finished areas where consistent shape and proportion matter to the completed installation.
The 36 x 5 x 5 cherry island column dimension defines how this Pro Value Series component fits into an island or cabinet run, giving installers a straightforward rectangular profile to plan around. The 5 inch square section presents flat faces that can align against panels or end caps in woodworking layouts, which simplifies marking and cutting for tight joints. At 36 inches long, the column can sit under work surfaces or in decorative framing where that length ties into surrounding components, keeping overall lines consistent across multiple columns if the design repeats them. As an unfinished wood column, surface preparation can be integrated into the same finishing stages used on nearby decorative hardware and moldings, so the column visually tracks with adjacent elements in the Decorative Hardware & Moldings category.
The Mission chamfered island column in cherry is classified under Decorative Hardware & Moldings in the Columns product class, so it is intended as a visible component in woodworking layouts rather than a hidden structural piece. The 36 inch length allows this Pro Value Series column to sit comfortably in island designs where a mid-height post defines corners, transitions, or decorative ends around work surfaces. With a 5 inch by 5 inch profile, the column provides clear, square reference edges that integrate cleanly with cabinetry or panel assemblies in cherry projects. The unfinished wood construction keeps this cherry column open to the same finishing approach used on adjacent decorative hardware and moldings, which supports visual continuity across an island or cabinet run that specifies cherry as the primary species.
The 36 x 5 x 5 dimension on this cherry Mission chamfered island column from the Pro Value Series gives installers a fixed reference when repeating layouts across multiple cabinets or islands, which reduces variability between units. The square 5 inch faces align predictably against flat casework or applied moldings, so measuring and scribing can follow simple straight-line references rather than complex curves. The Mission chamfered style sets straight edges with chamfers instead of turned details, which keeps layout lines easy to transfer from plans to material during cutting and fitting. As an unfinished wood column in the Decorative Hardware & Moldings category, this piece accepts preparation work in the same sequence as other columns and moldings, so the workflow for sanding and finishing can remain consistent across all similar components.
The island column measures 36 inches in length with a 5 inch by 5 inch cross section, which sets its height and footprint when planning island or cabinet layouts.
The column is made of unfinished wood in cherry, so it aligns with projects that specify cherry and can be prepared to track with surrounding cherry components.
This product is classified in Decorative Hardware & Moldings under the Columns product class, focusing it on visible decorative roles in woodworking installations.
The profile is described as a Mission chamfered island column, which indicates straight lines with chamfered details suited to mission-style design themes.
This column is from the Pro Value Series brand and is identified by manufacturer part number SZDW11017CH for ordering and reference.
The cherry Mission chamfered island column is sold in each by Wurth Baer Supply, so quantities on orders correspond to individual columns.
The Mission chamfered island column from the Pro Value Series provides a 36 x 5 x 5 cherry option that fits Decorative Hardware & Moldings projects needing a square post profile. With its unfinished wood construction and clear classification as a column, it slots directly into woodworking layouts where a cherry Mission-style element is specified. For projects tied to manufacturer part SZDW11017CH, this product page at Wurth Baer Supply aligns the size, style, and material into one straightforward choice.