36 inch mission island split column defines this Pro Value Series part as a 3 foot tall decorative wood column designed for island applications. The 36 inch length establishes a consistent vertical element, which helps align this column with standard island and cabinet heights in many shop-built layouts. The 1-1/2 inch by 3 inch dimension identifies a rectangular profile, giving you a narrow face and edge that can be oriented to match surrounding framing or panel layouts. Being a split column means it is configured in two matching halves, which allows you to work the piece around an existing island base or structural element rather than building everything around a solid post. The unfinished wood construction provides a sandable, stainable, and paintable surface, so you can bring the alder material to the color and sheen needed to coordinate with adjacent casework or trim.
This mission island split column uses a two-part configuration, so each half can be positioned along opposite sides of an island base or framing element during installation. The 1-1/2 inch by 3 inch profile establishes fixed face dimensions that can be laid out against cabinet corners, end panels, or framing members when planning your cuts. With a 36 inch overall length, the column gives you a defined span to integrate between floor and counter conditions that call for a 3 foot decorative leg element. Because the wood is unfinished alder, field trimming on length can be followed by edge preparation and finishing without working through a factory-applied coating. The SZDW11022AL manufacturer part number provides a single reference point when aligning drawings, orders, and shop cut lists for repeat island builds.
This 36 inch x 1-1/2 inch x 3 inch mission island split column is sized for projects calling for a 3 foot decorative member on an island or similar structure. The mission island designation ties the piece to island applications where a clean, defined column profile is required along corners or exposed sections. Its rectangular 1-1/2 inch by 3 inch section allows the column to sit tight against flat casework surfaces, so one face can align with a panel edge while the other spans along an adjoining side. Because it is made of alder, the column can visually connect with alder cabinet doors, frames, or moldings when the same species is carried across the job. The Pro Value Series identification keeps this part aligned with other decorative hardware and moldings in the same line, which can support a consistent look through multiple components in a single installation.
The split construction of this mission island column lets you work around an existing island base, so each half can be applied to opposing sides rather than routing or drilling through a solid post. This layout flexibility can simplify field fitting when the island framing dimensions are already fixed. The defined 36 inch length means drawings and cut plans can be built around a repeatable column size, which reduces adjustments when multiple islands or decorative legs share the same height requirement. The 1-1/2 inch by 3 inch shape provides a predictable footprint that can be factored into overhang, toe space, and alignment decisions before any cuts happen. With unfinished alder as the material, sanding, shaping minor adjustments, and then staining or painting can all be done as part of the normal finishing sequence, so the column integrates smoothly into the broader millwork workflow. The SZDW11022AL part number and Pro Value Series branding give you fixed identifiers that tie ordering and documentation back to the exact mission island split column used on the bench.
The 36 inch mission island split column measures 36 inches long with a 1-1/2 inch by 3 inch profile, so layout and joinery can be planned around these fixed dimensions.
The mission island split column is alder, giving you a consistent species choice when coordinating with other alder cabinetry, moldings, or trim elements on the same project.
The mission island split column is made of unfinished wood, providing a bare surface that can be sanded, stained, or painted to align with project-specific finish schedules.
The split column format provides two halves that can be positioned along opposite sides of an island base or structural member, allowing the decorative faces to wrap existing framing.
The SZDW11022AL manufacturer part number uniquely identifies this 36 inch mission island split column for ordering, documentation, and repeat use across multiple builds.
This mission island split column is part of the Pro Value Series, linking it to a defined family of decorative hardware and moldings for coordinated material selection.
The 36 inch x 1-1/2 inch x 3 inch mission island split column in unfinished alder provides a defined, species-specific option for island builds using a 3 foot decorative member. The split configuration lets you wrap existing island bases or framing with matching halves, while the unfinished alder surface fits directly into custom stain or paint workflows. With clear dimensions, a dedicated SZDW11022AL part number, and Pro Value Series identification, this mission island split column aligns ordering, layout, and finishing steps around a single consistent component.