Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Pro Value Mission Columns split column is a decorative applied column designed for the exposed ends of bar-height islands, peninsula returns, and raised counter runs.
At 42 inches tall, this column is sized for the raised-bar counter height common in kitchen islands with a seating overhang or a stepped upper deck. A 36 inch column falls short at a bar-height application and requires filler or stacking; this one reaches the underside of a bar-height surface without compromise. That single dimension is often the deciding factor when a cabinet shop is specifying columns for a kitchen with mixed counter and bar levels, and it is worth confirming the finished height before ordering, since the countertop thickness and any base below will affect where the column terminates.
The 1-3/4 inch depth against a 3-1/2 inch face width tells the full story: this piece presents a wide column face while projecting less than two inches from the panel it is applied to. In a walkway around an island, that projection difference matters. The 3-1/2 inch width gives the column a presence scaled to a bar-height island without pushing into the aisle. The Mission program's chamfered or rectilinear character suits cabinetry with a clean, linear aesthetic rather than a carved traditional profile.
Maple is a close-grained hardwood that takes paint crisply and accepts stain with consistent results, making it a practical match candidate when the surrounding cabinet boxes are also maple. The piece arrives unfinished, so the finish system, stain color, and sheen are controlled entirely in the shop. Because the column and the cabinet fronts share the same species, the grain character and absorption rate will be comparable, though an exact match depends on how each piece was milled and how the finish is applied. This is a decorative applied column and carries no structural load rating.
Cabinet shops building bar-height kitchen islands in a Mission or transitional style reach for this column when the island has an exposed end that needs a vertical architectural element. Designers specifying furniture-style cabinetry use it to carry a Mission vocabulary from the door profiles down to the base. Contractors and homeowners refitting an existing island to add a raised section find the 42 inch height eliminates the need to stack or trim a shorter column. It is a decorative piece and does not substitute for a structural post.
42 inches is the standard raised-bar counter height. A 36 inch column is sized for standard counter height. Using the wrong one means cutting down a column that is too tall or building up one that falls short.
Yes. It is a split or applied column, not a full round or square section. It fastens flat against a cabinet end panel and projects 1-3/4 inches from the face.
No. It is a decorative wood column with no load rating. It does not replace or substitute for a structural post.
Mission columns in this program carry a clean, rectilinear character consistent with Arts and Crafts and Mission-influenced cabinetry, as opposed to a fluted or carved traditional profile.
Specify this column when the island reaches bar height and the exposed end needs an architectural finish that stays in the Mission vocabulary without giving up walkway clearance.