42 x 3 x 3 Mission Tapered Bar Column defines this piece as a 42-inch tall, 3-inch by 3-inch column, so it suits bar-height layouts or similar vertical runs where a consistent dimension simplifies planning. The Mission tapered bar design gives a straight, clean profile that supports mission-style cabinetry or millwork where simple geometry matters for visual alignment. Being made of unfinished wood lets you sand, stain, or paint to match surrounding casework, so one part number can serve multiple finishes on the same job. The alder species identified in the product name gives you a workable hardwood that responds predictably to machining and finishing, which helps during trimming or touch-ups on site. As part of the Pro Value Series line, this column fits into a consistent decorative hardware and moldings family, which helps keep style and sizing aligned across a project.
The defined 42-inch overall length simplifies layout when you are standing columns under a bar top or similar surface, because elevations can follow a single reference dimension from floor to underside. With the 3-inch by 3-inch dimension set in the product name, you can plan face frames, aprons, or return panels to register cleanly against the column sides without guesswork on size. The Mission tapered bar form gives you predictable faces for scribing to floors or surfaces, which helps when conditions are slightly out of level. Because the column is made of unfinished wood, you can carry out sanding, edge easing, and finishing steps in your normal workflow before or after fitting into the decorative hardware and moldings assembly.
The classification under Decorative Hardware & Moldings and Columns places this 42-inch x 3-inch x 3-inch Mission Tapered Bar Column squarely in decorative millwork roles such as bar fronts, cabinet ends, and similar vertical accents. The tapered bar shape provides a defined architectural element, so it supports mission-style themes where straight lines and restrained details are important. Because it is made of unfinished wood, this column can be integrated into projects that call for custom stain or paint, allowing it to follow the same finishing schedule as door frames, panels, or trim. The alder material named in the product title supports applications where a hardwood feel is preferred in visible locations, tying into other alder components within a millwork package.
The stated 42-inch height and 3-inch by 3-inch footprint give fixed dimensions to build around, so spacing, reveals, and end conditions can be laid out accurately in shop drawings and during installation. This regular sizing helps when repeating the column across a bar run or along cabinets, because each location can be framed for the same section. The Mission tapered bar column profile presents consistent, straight faces for clamping or bracing during installation, so it can be held securely while adjoining decorative hardware and moldings are fastened. Unfinished wood construction allows both sides and edges to accept sanding and finishing uniformly, supporting an even appearance when the column is finished alongside doors, drawer fronts, or face frames. With the alder species indicated, cutting and machining behavior stays predictable, supporting clean joints where the column meets rails, stretchers, or surrounding trim.
The column is identified as 42 x 3 x 3, so it is 42 inches tall with a 3-inch by 3-inch cross section, supporting bar-height layouts and tight footprint planning.
The product name specifies alder and unfinished wood, so the column provides a workable hardwood surface that can be machined and then finished to match the surrounding millwork.
The unfinished wood surface accepts stain, paint, or clear coats as part of your normal finishing process, so the column can visually match other decorative hardware and moldings on the job.
The Mission tapered bar profile aligns with Mission-style and similarly clean-lined designs, so it coordinates with simple paneling and straight-edged trim elements.
The Decorative Hardware & Moldings and Columns classification points to use at bar fronts, cabinet ends, and other vertical accent points in woodworking projects.
SZDW11034AL identifies this specific 42 x 3 x 3 Mission Tapered Bar Column in alder, helping you reference or reorder the exact same column for future work.
The 42 x 3 x 3 Mission Tapered Bar Column in alder from the Pro Value Series offers defined dimensions, a mission-style tapered profile, and unfinished wood construction that adapts to your finishing system. For bar fronts, cabinet ends, or other decorative hardware and moldings work that calls for a 42-inch column, this part number aligns sizing, style, and finish flexibility in a single component.