Metro Cam Bar Split Column is a 42 inch x 1-3/4 inch x 3-1/2 inch decorative maple column that supports bar and cabinet layouts where a consistent face dimension matters. The defined 42 inch length helps layout planning in bar runs that need repeatable height between surfaces. The 1-3/4 inch by 3-1/2 inch cross section creates a compact rectangular profile that works into face frames or end treatments without demanding extra depth. Being part of the Columns class in Decorative Hardware & Moldings puts this piece in the same workflow as your other trim, so it lines up with standard woodworking processes. The maple species gives a known hardwood base that sands cleanly and takes machining in typical shop setups, which supports smooth edges and joints when you are tying it into cabinetry or millwork.
The 42 inch height on this Metro Cam Bar Split Column gives a predictable starting point when tying bar fronts into adjacent cabinetry or knee walls. The 1-3/4 inch thickness works into face frames and end panels without pushing the overall depth out of a typical line, which helps when aligning finished faces with countertops or other trim. The 3-1/2 inch width provides visual presence without overwhelming narrow runs, so the column can repeat across a bar front while keeping spacing practical. Because the column is made of unfinished wood, joints, edges, and transitions can be sanded flush before finishing, helping blended seams read as one surface after stain or paint.
This 42 inch x 1-3/4 inch x 3-1/2 inch Metro Cam Bar Split Column fits projects that call for decorative vertical elements within standard bar or cabinet proportions. The rectangular footprint lets it sit tight to flat faces, so it can frame bar fronts, support end details, or break up long cabinet runs without changing carcass dimensions. As part of Decorative Hardware & Moldings in the Columns class, it slots naturally into trim layouts around doors, panels, or open cabinet sections. Maple, used as the unfinished wood, integrates with hardwood face frames, rails, and stiles that often share similar machining behavior, which supports consistent milling passes across different parts.
The split column identity ties this piece to applications where two mating faces are planned along a surface, such as flanking a bar opening or dividing sections along a run. The fixed 42 inch height simplifies repeating that layout from station to station in a commercial bar or residential entertainment area. Its 1-3/4 inch thickness gives enough material to profile or ease edges while still aligning with common cabinet face frame thicknesses, which helps keep reveals tidy along doors and drawer fronts. The 3-1/2 inch width offers room for shaping or simple chamfers while leaving clear space for adjacent panels, giving you flexibility in how prominently the column reads in the finished elevation.
The defined 42 inch length on this Pro Value Series split column means every piece starts at the same vertical dimension, which supports consistent alignment under bar tops or along raised sections. That predictability reduces layout variation when you are installing several columns in sequence. The 1-3/4 inch dimension controls how far the column projects from the surface, which matters when running it alongside doors or drawer fronts that need to swing or slide without interference. The 3-1/2 inch width establishes a steady visual rhythm when used in multiples, helping you space columns evenly along a bar or cabinet run.
The unfinished maple construction lets cutting, routing, and sanding fall into the same sequence as the rest of your hardwood trim, which streamlines shop flow when you process everything in one setup. Being tied to manufacturer part number SZDW11051MA provides a repeatable spec reference for reorders, so future phases or matching work can use the same dimensions and material. As a Pro Value Series component in Decorative Hardware & Moldings, this column works alongside other coordinated pieces from the same source, which supports uniform look and dimensioning across connected millwork elements.
The Metro Cam Bar Split Column measures 42 inches long by 1-3/4 inches thick by 3-1/2 inches wide, providing a defined size for laying out bar fronts and cabinet end details.
The column is made of unfinished wood in maple, giving a hardwood surface that can be machined and then finished to match surrounding cabinetry or trim.
The unfinished wood construction allows sanding, shaping, and then application of stain or paint in the same finishing schedule as other raw wood components.
This product is classified under Decorative Hardware & Moldings in the Columns class, placing it alongside other trim and column pieces for coordinated designs.
The Pro Value Series branding identifies this column as part of a defined product line, supporting consistent selection across related decorative and molding parts.
Part number SZDW11051MA gives a specific reference for ordering and reordering this same 42 inch maple split column, aiding repeat use across phases or matching work.
This Metro Cam Bar Split Column in maple brings a 42 inch x 1-3/4 inch x 3-1/2 inch format that fits bar fronts and cabinetry needing defined vertical elements. The unfinished wood construction lets you process and finish it alongside other raw maple components, keeping workflow straightforward. Using the Pro Value Series and SZDW11051MA identifiers ties your drawings and orders to a specific, repeatable part, which supports consistent elevations across projects. For bar, cabinet, or trim runs that benefit from a stable hardwood column in these dimensions, this piece aligns with typical shop and installation sequences.