18 x 16 x 4-3/4 transitional rangehood corbel describes a wood corbel sized for projects that need substantial visual support and proportion, so it can serve as a focal point element in a rangehood or similar decorative installation. The 18 inch x 16 inch x 4-3/4 inch dimensions define the working envelope of this Pro Value Series component, helping you plan clearances and adjacent moldings around a known footprint. Being part of the Corbels product class within decorative hardware and moldings ties this piece directly to trim and architectural detail work, so it fits naturally into woodworking layouts that rely on matching decorative elements. The Pro Value Series brand identity ties this corbel to a broader line of decorative solutions, allowing you to coordinate style across multiple components in the same project.
The 18 inch x 16 inch x 4-3/4 inch size gives you fixed reference points when laying out a transitional rangehood corbel, letting you set reveal lines and overhangs to match other decorative hardware and moldings. Being made of unfinished wood means you work directly on the surface before mounting, sanding or profiling as part of your normal fabrication steps instead of adjusting around a prefinished face. The cherry species helps you select adhesives, fillers, or adjacent cherry trim that respond similarly during cutting and finishing. The Corbels product class designation signals that this piece is intended as a structural-looking decorative element, so you can design its placement as part of an integrated trim scheme rather than as a generic block.
The transitional rangehood corbel identity places this Pro Value Series part in rangehood surround work where decorative hardware and moldings define the look, so it suits projects that blend traditional and contemporary lines. Its 18 inch x 16 inch x 4-3/4 inch footprint lets you position it under a hood canopy, shelf, or similar feature where a corbel-sized element is required, helping you scale the design to match upper cabinet heights or hood depths. The cherry construction supports use in projects built around cherry casework or trim, which keeps grain and tone consistent from the corbel through to adjoining moldings. As a member of the Corbels category, it is intended to act as a shaped support element within a broader decorative plan, tying together panels, valances, and other architectural pieces in the same installation. The unfinished wood surface allows you to integrate this part into your own shop finishing sequence, so it enters the job site with the same color system and sheen as the surrounding cherry components.
The defined 18 inch height and 16 inch span give you repeatable layout measurements, so multiple SZDW11063CH units line up cleanly along a run without recalculating every position. The 4-3/4 inch measurement helps you coordinate depth with neighboring decorative hardware and moldings, which reduces edge steps between this transitional corbel and adjacent trim or panels. The unfinished cherry wood construction means your sanding, staining, or clear finishing processes act directly on raw material, supporting even absorption and a uniform appearance across the Pro Value Series rangehood corbel and other cherry parts. The manufacturer part number SZDW11063CH identifies this exact configuration, allowing you to specify or reorder the same 18 x 16 x 4-3/4 transitional rangehood corbel when building matching work in different areas of a project. The Each sales unit simplifies counting in design drawings, since every symbol on a plan can correspond directly to one decorative cherry wood corbel in the Corbels product class.
The corbel measures 18 inches x 16 inches x 4-3/4 inches, which defines the available height, span, and thickness when you design it into a rangehood or other decorative installation.
The transitional rangehood corbel is made of cherry unfinished wood, so it can be sanded and finished on site to coordinate with other cherry woodworking components.
This Pro Value Series corbel is sold in Each units, which lets you match your order quantity directly to the number of corbels shown on your project drawings.
This rangehood corbel suits decorative hardware and moldings projects that call for a transitional style cherry element sized at 18 inches x 16 inches x 4-3/4 inches.
The unfinished cherry surface lets finishing steps such as sanding and staining become part of your normal shop process, helping the corbel match other custom-finished pieces.
The SZDW11063CH manufacturer part number identifies this specific 18 x 16 x 4-3/4 cherry transitional rangehood corbel within the Pro Value Series line.
The 18 inch x 16 inch x 4-3/4 inch transitional rangehood corbel from the Pro Value Series combines a defined footprint with unfinished cherry wood, letting you integrate it cleanly into decorative hardware and moldings layouts. The Corbels product class and cherry material support projects where coordinated architectural details matter. For rangehood surrounds or similar woodworking work that uses cherry and needs a transitional corbel profile, this Each unit provides a clearly specified component you can repeat confidently across matching installations.