Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
10 x 10 x 4-3/4 transitional corbel defines this Pro Value Series maple support as a substantial piece for bar and counter overhangs, so it contributes noticeable visual weight and practical support in the same footprint. The 10 inch by 10 inch sizing gives a balanced, square profile that works well under bar tops where consistent projection and height simplify layout from one bracket to the next. The 4-3/4 inch width provides a solid bearing surface against cabinetry or framing, which helps spread load forces over a wider area of wood for more stable support. This transitional overhang bar bracket corbel style bridges traditional and contemporary projects, so it fits a range of design programs without forcing a highly ornate or ultra-minimal look. Because it is part of the Pro Value Series, installers can match this corbel when repeating details across multiple rooms or phases on the same job.
The 10 inch by 10 inch footprint on this maple corbel gives installers clear reference dimensions when laying out mounting locations under an overhang, so tradespeople can keep reveals and centerlines consistent from piece to piece. With 4-3/4 inches of width, there is enough surface area to engage solid cabinet sides or framing, which helps achieve firm attachment points when planning fastener patterns. The transitional overhang bar bracket profile works neatly beneath bar tops, islands, or counters, so it fits into both remodel and new construction layouts that call for visible wood support. Because the corbel is made of unfinished wood, fabricators can drill, notch, and shape contact areas as needed before finishing, allowing field adjustments to tie into actual site conditions.
This 10 inch x 10 inch x 4-3/4 inch transitional overhang bar bracket corbel fits naturally beneath bar tops, counters, or shelves that benefit from a visible wood support in maple. The square 10 by 10 proportion lines up well under many common overhang depths, so installers can repeat the same corbel size along a run without juggling multiple profiles. Its 4-3/4 inch width sits comfortably against cabinet ends or structural members, giving adequate face area for firm contact along the mounting surface. Because the corbel is made of unfinished maple wood, it suits projects where final color, sheen, and distressing are controlled on site to match door styles, moldings, or surrounding trim. The transitional styling bridges decorative hardware and millwork categories, so it can support both cleaner-lined cabinetry and spaces that incorporate more traditional shapes without visually clashing.
The defined 10 inch height and 10 inch depth on this Pro Value Series maple corbel simplify layout, since installers can work from known dimensions when spacing supports and setting back from finished edges. That predictable size helps reduce layout rework when multiple brackets repeat on long bar faces or large islands. The 4-3/4 inch width means the corbel presents a strong, stable body to work with during attachment, which can make it easier to register straight and plumb against cabinet sides while clamping or holding. Unfinished wood construction gives tradespeople full control over primers, stains, or clear coats, so finishing can be sequenced with doors, drawer fronts, and moldings for a unified appearance. Because this piece is part of the Pro Value Series and identified by manufacturer part SZDW11066MA, shops can reference the same corbel when ordering again for matching work or service replacements.
The corbel measures 10 inches high, 10 inches deep, and 4-3/4 inches wide, giving a substantial, square footprint that suits most bar overhang and counter support layouts.
The corbel is made of maple, providing a fine-grain hardwood surface that takes stain or clear finishes well for coordinated cabinetry and millwork projects.
This corbel is made of unfinished wood, allowing shops to sand and finish it to match existing cabinetry colors, sheens, and finishing systems on the project.
This transitional overhang bar bracket corbel is used under bar and counter overhangs, where its 10 x 10 size provides visible support and helps establish a repeating rhythm along the run.
The corbel is part of the Pro Value Series, positioning it within a branded line that supports consistent selection for repeat projects or coordinated millwork details.
Manufacturer part SZDW11066MA identifies this specific 10 x 10 x 4-3/4 maple transitional corbel, helping shops reorder the same piece when matching existing installations.
This 10 x 10 x 4-3/4 transitional overhang bar bracket corbel in maple gives installers a defined size, hardwood construction, and unfinished surface that work well in bar and counter applications. When a project calls for visible wood support that can be finished to match surrounding cabinetry, this Pro Value Series corbel provides a consistent, repeatable option identified by part SZDW11066MA. Choose it where the layout benefits from a square 10 by 10 profile and a 4-3/4 inch wide body that seats solidly against cabinets or framing.