Transitional large bar bracket corbel gives you a structural-looking support element that also finishes a project with a defined profile, so one part helps carry visual weight where bar tops or counters meet vertical panels. The 12-3/4 inch length provides a substantial vertical presence on face frames or end panels, which helps tie tall cabinets or bar fronts together visually on longer runs. The 4-3/4 inch depth suits typical overhang proportions, so you can align the front edge with a counter or bar detail for a consistent reveal. The cherry material matches cherry-based cabinetry and millwork, which helps you keep grain and color families consistent from corbel to door frames. Being part of the Pro Value Series gives you a repeatable source for this same style, which matters when you are laying out multiple stations or bays that need matching supports.
The 12-3/4 inch dimension works as the primary vertical run, so you can position the corbel so the long edge tracks the stile or panel height for a balanced layout. The 4-3/4 inch depth defines how far the element projects from a wall or cabinet, which helps you line it up with counter edges, bar rails, or face-frame fronts during layout. The listed 6-9/16 inch width gives you a stable bearing surface against the mounting substrate, so the corbel spans enough area for a solid, even contact patch when you fasten through from the back or side. The unfinished cherry surface arrives ready for your sanding and finishing sequence, which lets you integrate this piece into your normal finishing workflow without needing to work around a factory-applied coating.
This cherry transitional large bar bracket corbel suits decorative support roles in cabinetry and bars, because its 12-3/4 inch length and 4-3/4 inch projection align with common upper-cabinet and counter layouts. In a bar run, the depth can be set to sit just inside the overhang, so the profile reads clearly without crowding seating space. On kitchen islands, the 6-9/16 inch width gives the corbel enough shoulder to register against panels or posts, which helps keep reveals even from one end of the island to the other. In built-in furniture or office millwork, the unfinished cherry can be finished to track with casework or trim, so the corbel works as a repeatable theme element across different room types using the same wood species.
The transitional large bar bracket corbel format gives you a design that sits between ornate and plain, so you can reuse this same part on traditional or more streamlined projects without changing your layout dimensions. The 12-3/4 inch height becomes a consistent reference when spacing corbels along a bar or island, which reduces layout variation from one installer to another on the same project. The 4-3/4 inch depth works as a planning number when you coordinate overhangs, allowing you to keep a predictable gap between the corbel front and counter edge. The unfinished cherry construction means you can run the corbel through your standard cherry finishing schedule, so color and sheen track with doors, drawer fronts, and face frames pulled from the same project palette. The Pro Value Series labeling ties this SZDW11069CH corbel to a defined product class, which aids in reordering when additional supports are needed for later phases or matching work.
The corbel measures 12-3/4 inches by 6-9/16 inches by 4-3/4 inches, which sets its height, width, and projection so you can plan spacing, reveals, and overhang depths around fixed numbers.
The corbel is made of unfinished wood in cherry, allowing you to sand and finish it alongside cherry cabinetry or trim so grain and color stay within the same species family.
The 4-3/4 inch depth sets how far the corbel projects from the mounting surface, helping you align it under typical counter or bar overhangs for a consistent front reveal line.
The corbel being unfinished lets you apply your own stain or clear finish, so it can match existing or new cherry work without being limited by a factory-applied coating.
The SZDW11069CH part number identifies this specific 12-3/4 inch cherry transitional corbel, which supports consistent specifying and reordering when matching pieces on multi-phase jobs.
This corbel sits within the decorative hardware and moldings class, so it works alongside other trim elements to carry the same cherry and transitional style across a project.
The transitional large bar bracket corbel in cherry gives you a defined 12-3/4 inch by 6-9/16 inch by 4-3/4 inch profile that drops directly into bar, island, or cabinet layouts using similar dimensions. The unfinished wood construction lets you finish it with your standard cherry system, so it tracks with cases, doors, and moldings already in your schedule. With the SZDW11069CH Pro Value Series identifier, this corbel offers a repeatable option when you need consistent decorative support elements across multiple rooms or projects.