Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Transitional large bar bracket corbel gives a bar or counter a defined support point that also serves as a visible design element. This Pro Value Series corbel is made of unfinished wood, so it arrives ready for the finisher to stain or paint to match surrounding casework. The maple construction aligns with applications where a hardwood support component is preferred for a bar or ledge structure. With dimensions of 12-3/4 inches by 69/16 inches by 4-3/4 inches, the corbel establishes a substantial bearing surface and projection, which helps the installer plan layout spacing and overhang depth. The product is classified under corbels in decorative hardware and moldings, signaling its role as a structural-looking detail in woodworking and millwork projects. Sold in each form, it suits jobs where corbels are laid out individually along the run.
The maple transitional corbel measures 12-3/4 inches in one dimension, 69/16 inches in another, and 4-3/4 inches in the remaining dimension, giving installers concrete numbers for setting layout, reveal, and overhang relationships under a bar top. Being made of unfinished wood means surfaces are open to additional shaping or sanding before finishing, which supports fine-tuning edges and faces after test-fitting against cabinets or wall panels. The classification under decorative hardware and moldings signals that this part is intended to be visible once mounted, so its size and maple grain both influence how it reads alongside other millwork components in the finished room.
This transitional large bar bracket corbel is identified specifically for bar applications, so its proportions support use under bar tops, counters, or similar ledges where a bracket-style support is desired. The decorative hardware and moldings category places it alongside other trim and millwork details, which positions the corbel as both a visual and functional presence beneath horizontal surfaces. With its 12-3/4 inch dimension, the piece extends far enough to visually connect the underside of a top to the vertical face below, which helps define the bar structure. The 69/16 inch dimension, when oriented vertically, sets a noticeable drop that can break up a tall face panel and give the bar front a rhythm when multiple corbels are used along the length. The 4-3/4 inch measurement establishes the thickness or projection plane of the corbel body, which affects how far it carries out from the mounting surface and how it lines up with edge treatments on the bar top.
The SZDW11069MA part number identifies this specific Pro Value Series corbel, so repeating that number across a project helps maintain the same size and profile from one bracket position to the next. Made of unfinished wood in maple, the corbel can be prepared with the same stain or paint system as adjacent moldings, which supports a uniform color and sheen across all decorative hardware and moldings on the job. Because it belongs to the corbels product class, its role is clearly defined as a bracket-style support element, which simplifies planning when coordinating with other components such as panels or foot rails. The given 12-3/4 inch by 69/16 inch by 4-3/4 inch dimensions remain constant from piece to piece, which allows accurate shop drawings and on-site layout marks for bar spacing and alignment. Sold in each form, the corbel can be specified individually at each planned location, supporting straightforward counting during estimating and installation scheduling.
The transitional large bar bracket corbel is made of unfinished wood in maple, which lets the installer apply stain or paint to coordinate it with other maple cabinetry or moldings on the project.
The maple corbel measures 12-3/4 inches by 69/16 inches by 4-3/4 inches, giving clear reference points for planning bar overhang depth, vertical drop, and projection from the mounting surface.
This Pro Value Series component is a transitional large bar bracket corbel, placing it in a style suited to bar or counter support where a bracket-type, visible decorative hardware and moldings element is desired.
The unfinished wood surface allows sanding and finishing on-site so the corbel can be brought to the same color, grain emphasis, and sheen as nearby cabinets and trim during final finishing steps.
SZDW11069MA is the manufacturer part number for this specific maple transitional corbel, which supports consistent reordering and layout when the same profile is used across a bar run.
This maple bar bracket corbel is classified under corbels within decorative hardware and moldings, defining it as a visible support element that coordinates with other millwork components in woodworking projects.
The transitional large bar bracket corbel from the Pro Value Series gives bar and counter projects a defined maple support element with known dimensions of 12-3/4 inches by 69/16 inches by 4-3/4 inches. Its unfinished wood construction supports on-site finishing workflows, aligning color and sheen with surrounding decorative hardware and moldings. Identified by manufacturer part number SZDW11069MA and sold in each form, it fits projects where specific corbel counts, consistent sizing, and coordinated maple millwork are central to the layout.