9-1/2" x 47/8" x 4-3/4" Transitional Medium Bar Bracket Corbel, Maple

Transitional Medium Bar Bracket Corbel In Maple

Transitional medium bar bracket corbel gives you a wood support that bridges traditional and contemporary projects, so it can work in a wide range of cabinet and bar designs. The corbel measures 9-1/2 inches by 4-7/8 inches by 4-3/4 inches, which provides a defined size for planning overhangs or decorative details around that footprint. The maple construction gives a consistent, workable hardwood surface that suits machining, shaping, or edge detailing where a solid wood profile is needed. The piece is made of unfinished wood, so the surface is ready for stain, paint, or clear finish to match existing maple work. Sold in each unit quantities, this setup helps match the number of supports to layout needs on bars, counters, or casework runs.

Key Maple Corbel Details For Project Planning

• The 9-1/2 inch height gives a defined vertical dimension that can be laid out against bar aprons or cabinet sides, helping align tops or decorative runs consistently along a wall or island.
• The 4-7/8 inch width establishes the face size, letting you position multiple corbels across a span while maintaining even spacing and a balanced look under bar or counter edges.
• The 4-3/4 inch depth provides a projection reference, so you can coordinate bar or shelf overhangs within that support zone when integrating the corbel into a structural or decorative layout.
• Unfinished wood construction means the surface is open to sanding and finishing steps, allowing stain, paint, or clear coats to tie the corbel into surrounding maple doors, trim, or panels.
• Maple material gives a uniform hardwood body, supporting clean milling or profiling when a solid wood corbel is needed as a visible element in decorative hardware and moldings work.

Using Size And Finish For Clean Corbel Installation

The 9-1/2 inch height, paired with the 4-7/8 inch width and 4-3/4 inch depth, provides fixed dimensions that simplify layout work when setting corbel positions along bars or cabinets. Knowing these measurements in advance supports consistent spacing and alignment from one corbel to the next, which keeps visual lines straight across a run. Because the corbel is made of unfinished wood, it can move through your normal prep sequence before installation, from sanding to color work, so the finished tone matches adjacent maple elements. Sold in each units, it can be ordered in the exact count that matches the planned mounting locations across a project.

Where This Maple Corbel Fits In Shop Work

Using The Transitional Corbel In Bar And Cabinet Runs

The 9-1/2 inch by 4-7/8 inch by 4-3/4 inch sizing places this transitional medium bar bracket corbel in a range that suits bar fronts, counter edges, or casework where a moderate support profile is appropriate. As part of the decorative hardware and moldings category, it is well suited to projects where a visible wood element is part of the design rather than hidden structure. The transitional styling, reflected in the product name, gives flexibility for pairing with both simpler contemporary lines and more detailed traditional components in the same installation. Maple construction supports use anywhere a maple theme runs through cabinetry or millwork, helping keep species and grain appearance consistent across doors, frames, and trim pieces. Because it is a Pro Value Series corbel, it aligns with a broader group of components intended for woodworking industry applications that call for repeatable parts.

Why Dimensions And Unfinished Maple Support Results

The defined 9-1/2 inch height lets installers and shop staff work from a known vertical measurement when laying out multiple corbels, which supports straight top lines and matched clearances beneath overhangs. The 4-7/8 inch width and 4-3/4 inch depth give predictable face and projection sizes, which helps during templating and dry fit stages because each piece follows the same footprint. Unfinished wood surfaces allow full control over staining or painting schedules, so the same finishing system used on adjacent maple components can be applied to the corbel without working against a factory topcoat. Maple material provides a solid wood body that responds predictably to tooling, easing edge cleanup or light profiling if the shop wants to fine-tune the appearance. With a defined manufacturer part number, SZDW11072MA, reordering the same corbel for future phases or matching replacements remains straightforward within project documentation.

Common Questions About This Wood Bar Bracket Corbel

Select This Maple Corbel For Defined Bar Support

Choosing this transitional medium bar bracket corbel with its 9-1/2 inch by 4-7/8 inch by 4-3/4 inch dimensions gives a known maple profile for decorative hardware and moldings work. The unfinished maple construction allows finishing to be tailored to each project, while the SZDW11072MA identifier ties the part directly into shop drawings and order lists. Sourcing through Wurth Baer Supply connects this Pro Value Series corbel to a broader range of woodworking-focused products for coordinated bar, counter, and cabinet runs.