Shaker Tall Bun Foot gives you a straightforward wood foot option for furniture and cabinet work where a simple profile is needed. The 5 x 2-1/4 x 2-1/4 size defines the overall height and cross-section, so you can plan clearances and layout around that known dimension. Being part of the Pro Value Series ties this piece to a line focused on practical job use. The cherry material identifies it as a cherry wood component, which aligns projects that call for cherry parts. This bun foot is classified under Decorative Hardware & Moldings, so it is intended as a visible finishing element rather than a hidden structural block. As a bun foot in the Bun Feet product class, it serves as the termination between casework and floor, giving projects a defined base point.
The 5 x 2-1/4 x 2-1/4 dimensions define the physical envelope you work around when positioning this bun foot under cabinets or furniture, so the size is predictable during layout. As a bun foot, it is meant to interface between the case bottom and the floor, which guides how you plan its location at corners or intermediate points. The cherry, unfinished wood construction means you start with a bare wood surface that can be prepared to suit the installation environment using your preferred finishing system. Being cataloged as Decorative Hardware & Moldings indicates its role is visual as well as functional, so placement and orientation are chosen with appearance in mind.
The 5 inch height positions this Shaker Tall Bun Foot for applications where a moderate lift is needed between the floor and the case body, so it can be applied to furniture and cabinet pieces that require that elevation. With a 2-1/4 inch by 2-1/4 inch plan size, it suits corners or straight runs where that footprint is appropriate relative to the case width. The cherry identification makes it a natural fit on projects built from cherry or using cherry elements, because the material origin supports visual consistency after finishing. Its classification under Decorative Hardware & Moldings places it in jobs where the foot remains visible, such as exposed furniture bases or cabinet ends.
The defined 5 x 2-1/4 x 2-1/4 measurement on this bun foot provides a repeatable reference when you are standardizing heights across a room, so multiple units follow the same finished elevation. Because it is an unfinished wood cherry component, every foot starts from the same raw surface condition, which supports consistent finish build across a run of cabinets or furniture pieces. The bun foot product class indicates that each unit is intended to act as a discrete support point beneath a case, which helps when you are calculating how many contact points are needed under a given piece. As part number SZDW11106CH, it can be specified directly on drawings or material lists to tie field installation back to a clearly identified component.
The Shaker Tall Bun Foot has listed dimensions of 5 x 2-1/4 x 2-1/4, which defines its height and square cross-section for layout, elevation planning, and matching to other project components.
The Shaker Tall Bun Foot is identified as cherry and made of unfinished wood, so it functions as a cherry wood component ready for job-specific finishing processes.
This Shaker Tall Bun Foot is classified under Decorative Hardware & Moldings in the Bun Feet product class, marking it as a visible finishing element at the base of cabinets or furniture.
The Pro Value Series branding places this bun foot within a defined product line, helping installers and shops align it with other components specified under the same series identity.
The unfinished wood surface on this cherry bun foot provides a neutral starting point, so finishing can be carried out to match surrounding cabinetry or furniture in the same work sequence.
The manufacturer part number SZDW11106CH and the reference FT10010CH both identify this specific Shaker Tall Bun Foot for documentation and ordering purposes.
Choosing the Shaker Tall Bun Foot with its 5 x 2-1/4 x 2-1/4 dimensions and cherry, unfinished wood construction sets a clear standard for height and material on your project. Using the Pro Value Series identity and SZDW11106CH reference ties drawings, purchasing, and installation back to the same component, so the base detail remains consistent from planning through final fit.