Shaker tapered bun foot gives you a defined Shaker profile that supports clean, simple lines on cabinets and furniture pieces, so finished projects match Shaker styling requirements across a room or job. The 4-1/2 x 4-1/2 x 4-1/2 inch size establishes a substantial base height and footprint, which helps create consistent proportions between the casework and the floor. Being made of unfinished wood lets you sand, stain, or paint to match adjacent components, so toe spaces, end panels, and face frames present a unified appearance. The alder species gives a workable hardwood body that accepts common wood finishing systems, which supports predictable color and sheen across multiple legs on the same run. As part of the Pro Value Series line, this bun foot aligns with other professional-grade decorative hardware choices on a project.
The 4-1/2 inch height, width, and depth of this bun foot set the working clearances under cabinets or furniture, which lets you coordinate overall piece height with adjoining units. The square 4-1/2 x 4-1/2 inch footprint presents a broad contact area at each corner, which supports stable positioning against cabinet bases or frames. Because it is made of unfinished wood, surface prep and finishing steps integrate directly into normal finishing sequences, so staining or painting can be scheduled alongside doors, frames, and moldings for an even result. The alder species responds predictably to sanding and finishing, which supports consistent color and texture from foot to foot.
This bun foot is categorized under Decorative Hardware & Moldings in the Bun Feet class, so it is intended as a visible design element at the base of cabinets and furniture. The Shaker tapered profile pairs with square-edged face frames and simple door styles, which helps maintain an understated look while still raising the case off the floor. The 4-1/2 x 4-1/2 x 4-1/2 inch size suits base cabinets, vanities, and furniture pieces where a moderate leg height is desired, allowing toe spaces and bottom rails to align with surrounding units. Being part of the Pro Value Series, the component ties into broader decorative hardware selections, which supports using the same visual language across multiple rooms or installations. The unfinished alder body can be color-matched to existing cabinetry or millwork, extending a coordinated appearance from wall to floor.
The equal 4-1/2 inch measurements across height, width, and depth give you a predictable, cubic reference, which simplifies layout when you are repeating leg placement on several cabinets or furniture bases. That uniform sizing supports accurate build drawings and cut lists, because the same dimension applies in every direction at the corner. The Shaker tapered bun foot shape transitions from the square footprint toward the body of the piece, which provides a defined visual break between floor and cabinet while staying compatible with flat-panel Shaker doors. Unfinished wood construction means the surface can be integrated into shop or on-site finishing, which lets color, sheen, and grain presentation align with face frames and doors rather than relying on prefinished contrast. Alder as the material offers a balance of hardness and workability, so small adjustments such as trimming or edge easing can be brought in without complicating tooling. The SZDW11108AL part number and FT10012AL reference tie the foot to a specific cataloged item, which supports specifying the same component reliably whenever that profile and size are required on future jobs.
The bun foot measures 4-1/2 inches in height, 4-1/2 inches in width, and 4-1/2 inches in depth, so it establishes a square footprint and a defined base height for cabinets or furniture.
The bun foot is made of alder unfinished wood, giving a workable hardwood surface that can be sanded and finished to coordinate with surrounding cabinetry or trim.
The unfinished wood surface lets you apply stain, paint, or clear finishes during your normal finishing schedule, so the bun foot blends with doors, frames, and moldings.
The Shaker tapered design supports Shaker-style projects with simple, clean lines, helping bases visually align with flat-panel doors and straightforward face frame layouts.
This bun foot is used at the base of cabinets or furniture as decorative hardware and molding, providing a visible support element that completes the lower portion of the piece.
The SZDW11108AL manufacturer part number identifies this specific 4-1/2 x 4-1/2 x 4-1/2 inch alder Shaker tapered bun foot, helping you specify and reorder the same component.
The 4-1/2 x 4-1/2 x 4-1/2 inch Shaker tapered bun foot in unfinished alder gives you a defined size, a Shaker-friendly profile, and a finish-ready surface that can match surrounding cabinetry. Using the Pro Value Series SZDW11108AL part keeps your decorative hardware choices consistent across cabinets, vanities, and furniture pieces on the same job.