contemporary bar column maple describes this 42 x 3 x 3 Contemporary Bar Column in maple from the Pro Value Series, which serves as a decorative column for bar or millwork projects where a square, modern profile is needed. The 42 inch length gives enough vertical run to support bar-height designs or taller cabinet details in a single piece, helping layouts stay visually continuous. The 3 inch by 3 inch size creates a substantial square column that reads clean and contemporary, which suits straight-line bar fronts and modern room styles. Being made of maple means the column aligns with typical cabinet-grade hardwood programs that use maple face frames and doors. The unfinished wood construction allows sanding, staining, or clear finishing to match surrounding maple components, keeping color and grain consistent across the installation.
The 42 x 3 x 3 format provides predictable geometry for layout, so installers can frame bar fronts and end panels around a known square footprint. The 3 inch by 3 inch size creates a clear reference dimension at corners or transitions, which helps align panels and rails without guesswork on column thickness. The 42 inch height gives a consistent vertical reference when tying into standard bar-height conditions, which helps keep tops, aprons, and panel reveals visually straight. Because the column is unfinished wood, field trimming and edge sanding can integrate it tightly against adjacent cabinetry before finishing, which supports clean joints and professional-looking transitions.
The 42 inch x 3 inch x 3 inch Contemporary Bar Column in maple fits bar projects and decorative millwork layouts that call for a square, straight-profile support or visual post. Its 3 inch by 3 inch footprint lets designers place it at bar ends, wall returns, or panel breaks where a compact but noticeable column is needed. The maple construction supports use alongside maple cabinet doors, face frames, and moldings, so the column can act as a visual continuation of the casework system. As part of the Columns category under Decorative Hardware & Moldings, it is suited to roles where the column defines a finished edge or divide rather than structural framing, giving projects a designed, intentional look. In both residential and commercial bar environments that use maple casework, this column can tie base cabinets and bar tops into a cohesive decorative assembly.
The 42 inch height matters because it aligns with typical bar-height and tall base applications, reducing the need for joints that can interrupt the clean, contemporary look. When installers work with the 3 inch by 3 inch section, they gain a simple square reference that is easy to measure against toe kicks, end panels, and countertops, which supports repeatable placements from one column to the next. The maple material gives a hardwood surface that finishing crews can stain or clear coat to coordinate with other maple elements, which helps achieve visual continuity across doors, drawer fronts, and this column. Because the wood is unfinished, shop or field teams can perform final sanding, edge easing, and finishing after fitting the column into surrounding millwork, which supports tight seams and smooth transitions before topcoating. Within the Pro Value Series, having a standard maple column format allows shops to document this exact size and species in their bar programs for consistent results on repeat designs.
The bar column measures 42 inches long and 3 inches by 3 inches in section, which gives a tall, square profile suited to bar-height and decorative millwork layouts.
The Pro Value Series bar column is made of maple, providing a hardwood surface that aligns with maple cabinet components for unified appearance across bar installations.
The 42 x 3 x 3 maple column is made of unfinished wood, allowing sanding and finishing on site to match existing or planned finishes in the project.
The 3 inch by 3 inch square profile creates a clear reference size for corners and transitions, which simplifies aligning panels, rails, and bar tops around the column.
This item is classified in the Columns category under Decorative Hardware & Moldings, indicating its role as a decorative millwork column in bar and cabinet projects.
The manufacturer part number for this 42 inch maple Contemporary Bar Column is SZDW11136MA, which supports precise specification and reordering.
The 42 inch x 3 inch x 3 inch Contemporary Bar Column in maple from the Pro Value Series offers a defined size, species, and unfinished surface for bar and millwork layouts. The maple construction and square profile align with contemporary cabinet programs that favor clean, linear design. Using this unfinished wood column allows shops and installers to integrate it into their own finishing systems so the column tracks with surrounding maple casework. For projects built around maple Decorative Hardware & Moldings, this column provides a consistent, repeatable option that fits established bar designs.