Classic Medium Bar Bracket Corbel describes a decorative wood corbel sized for bar and cabinet work, identified here as 9 x 6-1/2 x 3 inches. That defined footprint helps plan depth, projection, and spacing so layouts align with your bar or counter design. The corbel is listed in the Decorative Hardware & Moldings Corbels category, so it is intended as a visible structural and decorative element in woodworking projects. The material is stated as maple and made of unfinished wood, which gives a smooth, hard wood species ready for sanding, staining, or painting to match existing millwork. Being sold in each form with a Pro Value Series brand designation suits projects where quantities are calculated per support point, letting you order an exact count for bar runs, cabinets, or shelving.
The 9 inch height of the 9 x 6-1/2 x 3 Classic Medium Bar Bracket Corbel establishes its vertical reach, which matters when aligning the top with bar tops or countertop undersides. The 3 inch width defines the bearing surface against a cabinet face or wall, affecting how much flat area is available for fasteners and adhesive selection during installation. The 6-1/2 inch dimension rounds out its profile, guiding how far the piece can project as part of a bar bracket layout. Being made of unfinished maple wood means field trimming, profiling edges, or easing corners can be done with standard woodworking tools before mounting.
The product name 9 x 6-1/2 x 3 Classic Medium Bar Bracket Corbel, Maple indicates a medium-scale corbel suited to bar fronts, countertop applications, and decorative cabinet details. Its classification under Decorative Hardware & Moldings Corbels positions it for use wherever a visible wood support or accent is needed in woodworking projects. The 9 inch height helps it sit comfortably under many bar tops and counters, allowing it to read as a substantial element without overwhelming smaller cabinet faces. The 6-1/2 inch dimension provides meaningful projection or width, depending on orientation, so it can participate in supporting overhangs or framing open shelving. The 3 inch measure offers enough mass for a solid profile, giving designers a defined block to shape into traditional or transitional cabinet and bar designs.
The combination of the Classic Medium Bar Bracket Corbel name and SZDW11149MA manufacturer part number gives a clear identifier, which matters when the same corbel must appear repeatedly along a long bar or through multiple phases of a project. The Pro Value Series brand ties the corbel to a defined product line, helping standardize selections when decorative hardware and moldings must coordinate. The 9 x 6-1/2 x 3 sizing provides fixed reference points for shop drawings, allowing installers and fabricators to set reveal lines, overhang distances, and spacing without guessing. Maple as the specified wood species, noted as made of unfinished wood, supports consistent machining characteristics, so routing, drilling, or shaping behaves similarly from piece to piece. Being sold in each form means counts can match layout drawings exactly, limiting leftover decorative pieces and keeping project quantities aligned with the actual number of support locations.
The 9 x 6-1/2 x 3 Classic Medium Bar Bracket Corbel, Maple is described as 9 inches by 6-1/2 inches by 3 inches, giving defined dimensions for planning countertop, bar, or cabinet layouts.
The corbel is made of unfinished wood specified as maple, which allows sanding, staining, or painting to match other maple components or to create a contrasting decorative detail.
This product is listed under Decorative Hardware & Moldings in the Corbels product class, positioning it as a decorative structural element for woodworking and cabinetry projects.
The SZDW11149MA manufacturer part number uniquely identifies this 9 x 6-1/2 x 3 Classic Medium Bar Bracket Corbel, Maple for ordering, specifying, and matching across different job phases.
The 9 x 6-1/2 x 3 Classic Medium Bar Bracket Corbel, Maple is described as sold in each form, so quantities can be matched to planned support locations or decorative positions.
The Classic Medium Bar Bracket Corbel name, maple unfinished wood material, and placement under Decorative Hardware & Moldings Corbels align it with visible bar and cabinet support applications.
The 9 x 6-1/2 x 3 Classic Medium Bar Bracket Corbel, Maple from the Pro Value Series combines a defined 9 inch by 6-1/2 inch by 3 inch size with unfinished maple construction, supporting precise planning and on-site finishing. Its role within Decorative Hardware & Moldings Corbels aligns it with cabinet, bar, and general woodworking projects where a visible maple support is needed. With the SZDW11149MA manufacturer part number and each-based selling format, it can be specified, ordered, and repeated wherever the same decorative bar bracket corbel is required.