10 x 10 x 3 Classic Overhang Bar Bracket Corbel defines this corbel as a substantial support piece sized for typical bar and counter overhangs, which helps installers quickly match the bracket to layouts that call for a 10 inch projection and height. The Pro Value Series brand identifies it as part of a decorative hardware line aimed at professional woodworking use, so it fits naturally into trim, molding, and bar-detail packages. Being categorized under Decorative Hardware & Moldings and Corbels establishes its role as both a structural support element and a visual accent in cabinetry and millwork. The maple material in the 10 x 10 x 3 Classic Overhang Bar Bracket Corbel provides a hardwood surface that takes machining and detailing well, which supports clean edges and consistent profiles on visible bar and island projects. The stated 10 inch by 10 inch by 3 inch identity describes a compact but sturdy footprint that suits many bar-front runs where brackets repeat along a wall.
The 10 inch by 10 inch by 3 inch Classic Overhang Bar Bracket Corbel identity provides a clear dimensional reference for installers laying out countertop or bar overhang support, so spacing and alignment can be planned around that known projection and height. Its role as a corbel in the Decorative Hardware & Moldings category indicates that it is shaped to sit under edges or overhangs, which supports predictable positioning along cabinet faces, knee walls, or bar fronts. The maple, unfinished wood construction means the corbel can be integrated into shop workflows that already handle maple components, which helps keep cutting, edge-cleanup, and finishing steps consistent across the entire run of parts on a project.
The 10 inch by 10 inch by 3 inch Classic Overhang Bar Bracket Corbel size aligns with common bar and counter overhang depths, so it suits applications where a solid bracket is needed under a projecting top. Its classification as a corbel within Decorative Hardware & Moldings signals that it is intended to be installed beneath surfaces and along vertical faces as part of a decorative support system, which makes it appropriate for bar fronts, kitchen islands, and similar millwork settings. The maple material in this Classic Overhang Bar Bracket Corbel allows it to visually coordinate with maple cabinets, rails, and trim, so it can be designed into projects where the species must match doors, face frames, or moldings. Because the wood is unfinished, shops and installers can sequence the corbel into the same stain or paint schedule as the surrounding work, allowing color and sheen alignment across the assembly. The Pro Value Series branding ties this maple corbel to other professional-grade decorative components, which can help maintain a unified style on larger bar or reception counter installations.
The specified 10 inch by 10 inch by 3 inch Classic Overhang Bar Bracket Corbel sizing gives fabricators a fixed datum for planning overhang support locations, which supports repeatable layouts across multiple brackets in a line. Being made of unfinished maple means the corbel can be processed with the same blades, bits, and sanding setups already tuned for maple, which helps keep machining behavior predictable from piece to piece. Its role as a corbel in Decorative Hardware & Moldings indicates a form designed for visible placement under tops and along cabinet ends, supporting consistent visual rhythm when several are used along a run. The Pro Value Series maple Classic Overhang Bar Bracket Corbel identity also helps specifiers document the exact part, which aids in reordering matching pieces for future phases or service work. Because the unit is sold in each, it allows precise quantity planning for linear bar runs or island projects, so counts can align directly with the number of support positions in the design.
The product is identified as a 10 inch x 10 inch x 3 inch Classic Overhang Bar Bracket Corbel, giving a clear sense of its height, projection, and thickness for bar or countertop support layouts.
The corbel is made of maple, described as unfinished wood, which lets shops and installers apply their preferred stain, clear coat, or paint systems suitable for maple projects.
The 10 x 10 x 3 Classic Overhang Bar Bracket Corbel is made of unfinished wood, so its maple surface arrives ready for on-site or shop-applied finishing tailored to the surrounding millwork.
The product is classified under Corbels within Decorative Hardware & Moldings, indicating use as a decorative support element under bar tops, counters, or similar overhangs in woodworking projects.
This corbel is part of the Pro Value Series and carries manufacturer part number SZDW11160MA, providing clear identification for specifications, documentation, and reorders.
The 10 x 10 x 3 Classic Overhang Bar Bracket Corbel is described with Packing & Sold In: Each, which supports ordering exact counts for specific bar or counter layouts.
The 10 inch x 10 inch x 3 inch Classic Overhang Bar Bracket Corbel, maple, gives you a defined hardwood corbel sized for typical bar and countertop projects, so it suits layouts needing a consistent 10 inch support element. Its unfinished maple construction allows finishing to align with surrounding cabinetry or molding work, supporting visual continuity on the job. With the Pro Value Series identity and clear part number SZDW11160MA, it slots cleanly into project specifications and reorders. Put this maple corbel to work wherever decorative support under an overhang must match maple millwork.