42 inch traditional fluted bar column gives you a defined vertical element for bar or cabinet designs, so you can build consistent elevations across a run. The 3-3/4 inch by 3-3/4 inch cross-section sets a substantial footprint, which helps you plan clear spacing against panels, toe kicks, and corners. Being part of the Pro Value Series ties this column to a known decorative hardware and moldings line, which helps when matching other trim pieces from the same family. The column is made of unfinished wood, so you can sand, stain, or paint it to align with surrounding casework and finishes on the project. The alder species gives you a workable hardwood base, which supports shaping and edge blending where the column meets rails, bases, or countertops. Sold in each form, this column can be ordered in the exact quantity needed for a layout.
The 42 inch length on this Pro Value Series column sets your primary reference for vertical layout, so you can size plinths or top build-ups around a known dimension. With a 3-3/4 inch by 3-3/4 inch profile, the column occupies a predictable footprint, which simplifies aligning it with applied panels, bar dies, or corner treatments. The traditional fluted design delivers a shaped face from the start, so field work focuses on fitting and finishing rather than carving detail. Because it is made of unfinished wood, the column accepts your choice of topcoat, which supports blending it into existing alder cabinetry or other wood species through stain matching and finish steps.
This traditional fluted bar column sits in the Decorative Hardware & Moldings - Columns category, placing it alongside other trim elements used on bars, islands, and built-ins. The 42 inch length pairs naturally with many bar-height and cabinet applications, giving you vertical structure between base sections or at corners. Its 3-3/4 inch by 3-3/4 inch size works for visible support-style locations, where a squared profile is preferred for aligning to panels or face frames. As part of the Columns product class, this piece serves as a visual and structural element in decorative assemblies, supporting design themes that call for traditional fluting.
The alder construction of this unfinished wood column lets you work with a stable hardwood when trimming ends to fit specific heights, which supports consistent cuts across multiple pieces in the same project. Traditional fluted styling is built into the face, so each column presents matching detail, helping large installations look uniform without additional shaping steps. The 3-3/4 inch square dimension gives a repeatable reference for setting reveals to doors, drawer fronts, or end panels, simplifying layout from one cabinet section to the next. With the Pro Value Series designation and part number SZDW11181AL, this column can be referenced easily in drawings and material lists, supporting clear communication between design, shop, and field crews. Being sold in each units allows ordering to follow exact column counts, which aligns purchasing with the number of planned decorative positions.
The column measures 42 inches in length and 3-3/4 inches by 3-3/4 inches in cross-section, which sets clear planning dimensions for bar fronts and cabinet layouts.
The column is made of unfinished wood in alder, giving you a hardwood base that accepts sanding, stain, or paint to coordinate with surrounding millwork.
The unfinished wood construction lets you apply your own finishing system, so the column can match existing cabinetry colors and sheens on each specific job.
The traditional fluted design builds in vertical grooves along the face, creating a classic profile that visually ties multiple columns together in a run.
The 3-3/4 inch square size defines a consistent footprint, helping you plan reveals, overhangs, and panel alignments around a known column width and depth.
Part number SZDW11181AL identifies this specific Pro Value Series 42 inch traditional fluted bar column, supporting accurate ordering and repeat use on future projects.
The 42 inch traditional fluted bar column in alder gives you a defined size, a classic fluted profile, and an unfinished wood surface ready for your finish system. With its 3-3/4 inch by 3-3/4 inch footprint and Pro Value Series designation, this column fits neatly into bar and cabinet layouts that call for traditional columns. Use the SZDW11181AL part reference to align design, estimating, and shop teams around the same decorative element.