traditional reeded bun foot describes this Pro Value Series component designed as a shaped wood support for cabinets, furniture, and similar woodworking builds. The 4 inch dimension in the product name indicates the approximate height, which helps position pieces at a consistent working or display level across a project. The 4-3/4 inch by 4-3/4 inch sizing defines the footprint area, guiding layout when planning corner placements or structural support points under frames. Being part of the Bun Feet product class means it serves as both a functional support and a decorative element in the Decorative Hardware & Moldings category, tying structural needs to visual design. The cherry material called out in the name defines the wood species, so color tone and grain can match or coordinate with cherry-based casework or trim details. The unfinished wood construction means surface preparation and finishing steps can be aligned with the rest of the installation so final color and sheen stay consistent.
The 4-3/4 inch diameter noted in the description establishes the round profile size, which affects how far the bun foot projects beyond the cabinet or furniture corner when laid out against rails or stretchers. The 4 inch height from the name defines how much elevation the bun foot adds beneath a case, influencing toe space, cleaning access, and visual proportions between base and upper sections. The reeded traditional styling integrates decorative fluting into the form, giving installers a clear orientation reference when aligning multiple feet so the pattern reads consistently around a piece. Because the bun foot is made of unfinished wood, surface sanding, sealing, and finishing steps can be sequenced with the rest of the job, which keeps drying times, color development, and sheen uniform across doors, frames, and trim.
The product category Decorative Hardware & Moldings|Bun Feet places this 4 inch cherry bun foot squarely in applications where visible support elements are part of the design, such as cabinet bases, furniture corners, or built-in casework transitions. The traditional reeded bun foot profile brings a classic look suited to projects that echo turned legs, crown details, or raised panel themes, so it works naturally beneath face-frame cabinets or furniture with similar styling cues. The 4-3/4 inch by 4-3/4 inch footprint defines a broad contact area, which suits placement at cabinet corners, under end panels, or below furniture aprons where both stability and appearance matter together. Being classified as a Bun Feet product means it functions as a termination point between the floor and the cabinet or furniture base, so it visually finishes the lower edge while also carrying structural load. The cherry designation in the product name aligns this piece with cherry casework and trim, making it an appropriate choice in rooms or installations where cherry is the dominant wood species.
The clearly stated 4 inch x 4-3/4 inch x 4-3/4 inch dimensions give installers predictable sizing, which simplifies setting consistent base heights and spacing layouts across multiple cabinets or furniture pieces. Knowing the 4-3/4 inch diameter guides corner positioning and overhang planning, reducing layout guesswork when aligning the bun foot against rails, stretchers, or corner blocks. The reeded traditional design is repeated on each piece by the Pro Value Series line, so patterns remain visually consistent from one corner to the next in a room or on a larger furniture run. The unfinished wood construction allows all bun feet in a project to be finished together, which supports color and sheen uniformity and helps avoid mismatched tones between supports and surrounding cherry components. The manufacturer part number SZDW11197CH ties this exact design, size, and cherry material to a specific identifier, supporting repeat orders on future jobs where the same visual and dimensional results are required. The SAP description FT10001CH, TRAD BUN FOOT,4.75'DI X 4',CH repeats the key size and cherry details, providing a text reference that matches the physical characteristics relied on during layout and finishing.
The bun foot is described as 4 inch x 4-3/4 inch x 4-3/4 inch, which defines the approximate height and the footprint dimensions used when planning base elevation and corner support locations.
The traditional reeded bun foot uses a classic grooved profile, which supports furniture and cabinet projects that echo turned legs, raised panels, or other traditional decorative hardware elements.
The bun foot is made of cherry wood, so it coordinates visually with cherry cabinets, furniture, and moldings when selecting materials for a unified appearance across the project.
The Web Description notes that it is made of unfinished wood, so sanding, staining, painting, or clear finishing steps can be carried out to match surrounding components.
The 4.75 inch diameter defines how far the bun foot extends from the corner, guiding placement against cabinet rails or furniture frames so projection and reveal stay consistent.
Manufacturer part number SZDW11197CH identifies this specific 4 inch traditional reeded cherry bun foot, helping projects repeat the same size, style, and material on future orders.
This Pro Value Series traditional reeded bun foot in cherry brings a defined 4 inch x 4-3/4 inch x 4-3/4 inch size and unfinished wood surface to cabinet and furniture work. Those verified dimensions and the cherry material help align layout, base elevation, and visual match across casework, moldings, and furniture pieces. For projects where decorative hardware bun feet are part of the design language, this specific SZDW11197CH model provides a consistent reference point for current installations and later expansions.