36 x 5 x 5 square traditional island column describes a Pro Value Series decorative wood column sized for projects that call for a 36 inch height and a 5 inch by 5 inch profile, so dimensions line up with planned island or cabinet layouts. The column is made of unfinished wood, which lets you sand, stain, or paint to match surrounding cabinetry or trim without working against a factory finish. Its square traditional style supports designs that favor clean lines with classic detailing, so it fits many standard kitchen island and decorative post applications. As a product in the Columns class under Decorative Hardware & Moldings, it serves as a visible structural or decorative element in woodworking projects where matching moldings and trim are important. Sold in each unit quantities, it suits jobs where an exact column count is needed.
This Pro Value Series 36 inch x 5 inch x 5 inch square traditional island column gives you known outer dimensions, which simplifies laying out bases, plinths, or top caps that register cleanly on the column faces. The square form means each side presents the same width, so aligning faces with cabinet ends or island corners does not require compensating for turned profiles. Because it is part of the Columns product class, it is intended to be used where a defined vertical element is required, helping you plan mounting points and transitions to adjacent moldings. The unfinished wood surface accepts typical woodworking preparation steps, so edge easing and sanding before installation can be handled as part of normal shop workflow.
The 36 x 5 x 5 square traditional island column is sized for projects that revolve around a 36 inch vertical element, which aligns with many base-level designs for kitchen islands and similar cabinetry structures. Its 5 inch by 5 inch footprint provides a visually solid post at island corners or between cabinets, so it can act as a defining vertical between runs of doors, drawers, or open shelves. Being part of the Decorative Hardware & Moldings Columns category, it is intended for visible locations where a finished look matters, such as kitchen islands, peninsula ends, or decorative room dividers that echo cabinet styling. The square traditional form supports layouts that call for straight-edged posts rather than turned legs, which pairs well with panel-style island ends and straightforward trim build-ups.
The use of unfinished wood on this Pro Value Series column means it can be finished alongside surrounding alder or other wood components in the same finishing cycle, which helps keep color and sheen consistent across doors, panels, and columns. Having the column supplied as a single, defined component simplifies takeoffs for projects that specify individual column counts, such as four posts on an island or a series of columns along a built-in run, which supports straightforward ordering and planning. Its defined dimensions also provide a known reference when designing complementary moldings or bases, since profiles can be sized to land cleanly on a 5 inch wide face without awkward overhangs or gaps.
The 36 inch height of this square traditional island column sets a predictable starting point for layouts where the column terminates at or near base cabinet height, which helps align rails, panels, or stretchers to the same elevation across a run. The 5 inch by 5 inch square cross-section stays constant from face to face, so measurements for notching, routing, or adding applied trim can be transferred from one side to another without recalculating for varying diameters or tapers. As unfinished wood, the surface can be sanded and prepared in the same sequence as doors, drawer fronts, and panels, which keeps workflow unified in shops that batch-process components before finishing.
The Pro Value Series designation identifies this column as part of an organized product line, which supports repeatable selection when projects across multiple rooms or phases must share the same style and material. Being listed under Decorative Hardware & Moldings in the Columns class makes its role as a finished decorative column clear, so it can be specified confidently wherever a visible vertical element is needed to complement moldings and trim layouts. The clear web and SAP descriptions, including the SZDW11202AL part number, give a precise reference for reordering the same column on follow-up work, helping maintain consistent results across multiple jobs.
The column measures 36 inches in height and 5 inches by 5 inches in cross-section, so layouts can be built around a known post size at base or island level.
The column is made of unfinished wood, allowing sanding, staining, or painting so its appearance can be matched to surrounding cabinetry and trim work.
The product is in the Decorative Hardware & Moldings Columns category, indicating its primary role as a visible decorative column in finished woodworking projects.
The unfinished wood surface accepts typical shop preparation and finishing, so sanding, staining, or painting can be integrated directly into normal finishing workflows.
Pro Value Series identifies this column as part of a named line, helping maintain consistent style and material when selecting related decorative components.
The column is classified under Decorative Hardware & Moldings as a Columns product, clarifying its role as a finished vertical element in design and takeoffs.
The 36 x 5 x 5 square traditional island column from the Pro Value Series offers a defined 36 inch height and a 5 inch by 5 inch square profile, which simplifies laying out island corners and decorative posts. Its unfinished wood construction gives finishing flexibility, so color and sheen can match surrounding woodwork on the same job. With a clear role in the Decorative Hardware & Moldings Columns category and a distinct SZDW11202AL part number, it can be specified confidently wherever a square traditional wood column is required.