corner round face wood pedestal foot cherry identifies this as a cherry wood pedestal foot with a rounded face, so it suits projects where a visible wood grain and warm cherry tone support a furniture-grade look once finished. The 6 x 6 x 4-1/2 inch size defines a substantial footprint and height, letting you build or retrofit cabinets, casework, or furniture where elevation and proportions matter visually and structurally. Being part of the Pro Value Series ties this foot to a consistent product family, which helps when matching multiple pieces across a room. The bun feet product class connects it to traditional bun-style profiles, fitting designs that call for a classic rounded support at each corner. Made of unfinished wood means the surface is ready for your preferred finish system, so stain, clear coat, or paint can be matched to existing work or new builds.
The corner-oriented design indicated by corner round foot centers this piece at a cabinet or furniture corner, so layout focuses on aligning two case sides over the 6 x 6 base. The 4-1/2 inch height defines how far the case lifts off the floor, so hinge clearances, toe space, and adjacent trim layout are planned around that dimension. With the 6 x 6 x 4-1/2 inch form defined in the product name, installers can size plinths, corner blocking, or internal supports to sit directly over the footprint. Being made of unfinished wood lets fabrication steps such as shaping, minor trimming, or edge softening occur before finishing, so you can address fit and alignment first and then move to stain or topcoat. The bun feet product class signals use as a structural and decorative base element rather than a hidden support.
The product name 6 x 6 x 4-1/2 corner round face wood pedestal foot cherry establishes this as a pedestal element for corners of cabinets, case pieces, or furniture needing raised support. Its bun feet classification links it to decorative hardware and moldings, so it functions as both a support and a visible design element at the base of a piece. The cherry reference in the name connects this foot to cherry cabinetry or furniture, letting you carry the same species down to the floor line for a unified appearance once finished. The 4-1/2 inch height helps when a moderate lift is desired, such as under storage cabinets, chests, or accent pieces that benefit from some floor clearance without looking overly tall.
Being part of the Pro Value Series aligns it with other decorative hardware and moldings offered under the same branding, which can simplify selection when building out a coordinated project. Its round face description points toward a softer visual transition from case side to floor, which supports traditional or transitional styles where a rounded base detail is expected. As a pedestal foot categorized under decorative hardware and moldings, it is suited to jobs where base components are intended to be seen and detailed, rather than hidden behind toe kicks or solid plinths.
The specified dimensions of 6 x 6 x 4-1/2 inches provide a repeatable template, so multiple corners across a run of cabinets or furniture pieces can be laid out to the same height and footprint. The SAP description FT10026CH, TRAD RND CORNER FOOT,4.5'H,CH reinforces that this is a traditional round corner foot at 4.5 inches high in cherry, giving a clear reference when reordering for future phases or matching an existing installation. The manufacturer part number SZDW11205CH uniquely identifies this exact pedestal foot, which matters when shops or installers need consistent geometry and material from job to job.
Placement under decorative hardware and moldings in the catalog signals that this part is intended to be part of the finished visual package, guiding finishing workflows so that stains, clears, or paints are scheduled with other exposed trim. The unfinished wood construction supports consistent finishing across batches, since each foot starts from the same bare wood state. Together, the naming, part numbers, and category classification support predictable repeat work, from initial layout through finishing, whenever this pedestal foot is specified.
The 6 x 6 x 4-1/2 inch corner round face wood pedestal foot cherry provides a 6 inch by 6 inch footprint with a 4-1/2 inch height, which sets both support area and elevation for your project.
The corner round face wood pedestal foot cherry is made of unfinished wood, so it arrives ready for your sanding and finishing steps to match surrounding cabinetry or furniture.
The description as a traditional round corner foot identifies it as a corner-mounted pedestal element that supports casework or furniture at each outer corner location.
This cherry pedestal foot is part of the Pro Value Series and is classified under bun feet within decorative hardware and moldings, grouping it with similar decorative base components.
This pedestal foot is identified by SAP description FT10026CH, TRAD RND CORNER FOOT,4.5'H,CH and manufacturer part number SZDW11205CH, giving clear references for future orders.
This component is listed under decorative hardware and moldings as a bun foot, so it is intended as a visible pedestal support for cabinets, case pieces, and similar furniture.
The 6 x 6 x 4-1/2 corner round face wood pedestal foot cherry from the Pro Value Series offers a defined cherry bun foot option when a traditional corner pedestal is needed. With its unfinished wood construction and clearly specified dimensions, this part supports straightforward layout, fabrication, and finishing steps on furniture or cabinet jobs. When a project calls for a cherry bun foot that matches decorative hardware and moldings in both scale and role, this pedestal foot provides a consistent, repeatable choice.