Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3/4 inch diameter standoff kit describes a complete Pro Value Series set designed to mount a sign or display using matching components, so the finished installation looks consistent and intentional. The 3/4 inch diameter standard caps grip the face of the sign or panel, holding it against the barrels so the display sits reliably on its supports. Matching 3/4 inch by 3/4 inch barrels space the material off the mounting surface, creating a defined stand-off that keeps the sign away from the wall. Studs designed for material up to 1/2 inch thick tie the caps and barrels together through the panel, so typical sign and display substrates within that range are securely clamped. The satin clear anodized finish on the aluminum components presents a neutral appearance that works wherever a low-glare metal look suits the installation.
The 3/4 inch by 3/4 inch barrel size fixes both projection and grip length, so once hole positions and layout are set, installers can repeat the same stand-off depth across multiple panels. Studs rated for material up to 1/2 inch thick guide the choice of panel thickness, keeping the threaded connection properly engaged while clamping the sign. The 3/4 inch diameter standard caps cover the drilled holes in the material, so the visible hardware face is consistent and hides the through-holes. Combination screws working with multi-purpose nylon anchors tie each barrel to the mounting surface, helping the assembly stay aligned where wall conditions match typical anchor applications.
This Pro Value Series standoff kit sits in the multimedia and workspace components category, so it aligns naturally with sign and display mounting in organized environments. The 3/4 inch diameter caps give enough face area to support smaller signage or display panels at each mounting point, which suits identification signs or information displays that use moderate panel sizes. Barrels at 3/4 inch length provide a defined gap between wall and panel, presenting the sign slightly off the surface so graphics remain readable without the panel sitting flush. Because the studs address material up to 1/2 inch thick, the kit accommodates many common substrates such as rigid display boards or similar sign materials that fall within that thickness range. Installers working on shelf, closet, garage, or workspace organization projects that call for posted identification or instructions can use the standoffs to hold those panels in visually consistent positions.
The SZG4016 manufacturer part number identifies this specific 3/4 inch diameter by 3/4 inch long configuration, so reordering or matching existing installations remains straightforward when additional signs are added. The satin clear anodized finish across the visible aluminum components gives a subdued metallic appearance, which helps the hardware support the sign rather than draw attention away from the message. Using four caps, four barrels, and four studs in one coordinated layout keeps each corner of the panel built from the same parts, reducing variation that could cause misalignment or uneven gaps. Combination screws with multi-purpose nylon anchors connect each barrel to suitable wall materials, supporting a consistent installation method wherever those anchors are appropriate. Because the kit is described as a complete standoff kit for installing a sign or display, installers can plan layouts knowing the core mounting elements share matching dimensions, finish, and part identity.
The 3/4 inch diameter standoff kit uses studs for material up to 1/2 inch thick, so sign or display panels within that range can be clamped between caps and barrels.
The 3/4 inch by 3/4 inch barrels set a stand-off of 3/4 inch from the mounting surface, establishing a consistent gap between the wall and the sign panel.
The satin clear anodized finish on the aluminum parts creates a low-glare metallic look, so the hardware appears neutral while supporting the sign visually.
The Pro Value Series standoff kit provides four caps, four barrels, and four studs, enabling a four-point mounting pattern for a typical rectangular sign or display.
The standoff kit uses combination screws with multi-purpose nylon anchors to fasten each barrel to the mounting surface, giving the stand-offs a firm base.
The SZG4016 standoff kit is described for installing signs or displays, so it suits mounting identification or informational panels in organized work or storage areas.
The Pro Value Series 3/4 inch diameter by 3/4 inch long standoff kit ties caps, barrels, studs, screws, and anchors into one coordinated setup for sign or display mounting. When an installation calls for a satin clear anodized look, 3/4 inch projection, and material up to 1/2 inch thick, this SZG4016 configuration aligns those needs in a single part choice. For repeat work across shelf, closet, garage, or workspace projects using similar sign sizes, choosing this same kit each time keeps dimensions and appearance consistent from panel to panel.
