Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3/4 inch diameter standoff kit defines this Pro Value Series assembly as a matched set for mounting a sign or display with uniform spacing from the wall. The 3/4 inch diameter standard caps give the installation a consistent, finished face across all four mounting points. The 3/4 inch by 1-1/4 inch barrels hold the sign or display off the surface by 1-1/4 inches, creating a visible gap that separates the graphic from the wall. Studs sized for material up to 1/2 inch clamp panels of that thickness range securely between caps and barrels. The satin clear anodized aluminum finish provides a uniform, muted metallic appearance that visually supports printed signs and graphics without overpowering them. The SZG4018 manufacturer part number clearly identifies this exact 3/4 inch diameter x 1-1/4 inch long standoff kit for repeat orders, matching, or specification-driven jobs.
This p Complete standoff kit with everything you need to install a sign or display. br Kit includes:(4) 3/4" Diameter Standard caps(4) 3/4" x 1-1/4" Barrels(4) Studs for material up to 1/2"(4) Combination screws and multi-purpose nylon anchors br Installation Instructions /p description establishes the kit as a coordinated assembly for sign or display mounting. The 3/4 inch diameter caps indicate the size of the holes needed in the panel, guiding layout when drilling sign corners. Barrels listed as 3/4 inch by 1-1/4 inch define the projection from the wall, helping plan clearance behind the panel for wall textures or low-profile obstructions. The studs specified for material up to 1/2 inch set the working range for panel thickness selection. Combination screws paired with multi-purpose nylon anchors link the barrels to the wall, forming the structural connection that carries the sign or display load.
The Web Description states that this is a standoff kit for installing a sign or display, so it suits applications where a flat panel needs to stand off from a wall surface. The 3/4 inch diameter standard caps are suited to panels with corner holes sized to accept that diameter, often used in printed graphics, informational panels, or branding plates. With barrels measuring 3/4 inch by 1-1/4 inch, the hardware positions the sign 1-1/4 inches from the mounting surface, which visually separates the panel from the wall to highlight the graphic. Studs that handle material up to 1/2 inch give flexibility for typical sign substrates, from thinner panels up through 1/2 inch sheet, without changing the kit. The satin clear anodized finish on the aluminum components supports use in interior spaces where a neutral metallic look coordinates with other trim and fixtures.
The SZG4018 manufacturer part number ties directly to the SOK-75-125, STANDOFF KIT,.75"X1.25",ALU SAP description, so specifying this identifier repeats the same 3/4 inch by 1-1/4 inch geometry across multiple projects. The combination of 3/4 inch diameter caps and matching 3/4 inch barrels provides aligned components, which keeps the visible hardware consistent at each mounting point. The barrels at 1-1/4 inch length create a fixed offset, so subsequent installations using this same kit present at the same projection, supporting uniform alignment across a wall of signs or displays. Studs sized for material up to 1/2 inch anchor through the panel into the barrels, so different signs within that thickness range can be swapped while the wall interface remains constant. The satin clear anodized aluminum finish noted in the SAP description establishes a specific appearance, so when the same kit is used again, the hardware visually matches earlier installations for a coherent look.
The SZG4018 standoff kit uses studs for material up to 1/2 inch, so it supports sign or display panels within that thickness range while still engaging properly with the barrels.
This standoff kit uses 3/4 inch by 1-1/4 inch barrels, so the sign or display is held 1-1/4 inches off the mounting surface for a defined stand-off gap.
The kit uses 3/4 inch diameter standard caps, so sign or display panels are typically drilled to suit that 3/4 inch diameter at each mounting location.
The SAP description identifies the kit as ALU with satin clear anodized, so the aluminum components present a muted, uniform metallic finish on exposed hardware.
The Web Description lists combination screws and multi-purpose nylon anchors, so the barrels fasten to the wall through these components to support the sign or display.
This product is identified as Pro Value Series SZG4018 and SOK-75-125, STANDOFF KIT,.75"X1.25",ALU, so those codes specify this exact configuration.
The Pro Value Series 3/4 inch diameter x 1-1/4 inch long standoff kit, satin clear anodized, provides a matched set of caps, barrels, studs, screws, and anchors tuned for sign or display mounting. The SZG4018 designation directly ties the hardware geometry to SOK-75-125, STANDOFF KIT,.75"X1.25",ALU, so the same setup can be ordered again when a project repeats this stand-off distance and finish. When a job calls for a fixed 1-1/4 inch offset, 3/4 inch diameter caps, and panel capacity up to 1/2 inch, this kit aligns those requirements in a single, coordinated product.
