Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1 inch diameter standoff kit from the Pro Value Series is designed as a complete system to install a sign or display, so installers get the core components needed to mount panels off the wall in a consistent, professional way. The kit uses 1 inch diameter standard caps that spread the bearing surface on the panel face, which helps support the sign or display material without concentrating stress at a tiny point. Matching 1 inch x 2 inch barrels hold the panel at a fixed 2 inch stand-off distance from the mounting surface, keeping graphics or panels cleanly projected off the wall for better visibility. Studs sized for material up to 3/4 inch thick let the same kit handle a range of common panel thicknesses in sign and display work. Satin clear anodized aluminum construction provides a uniform, finished look that fits multimedia and workspace components.
The SZG4021 standoff kit organizes the components into a straightforward mounting sequence, which helps installers move from layout to finished sign or display with fewer steps to interpret. Combination screws drive through the panel and into multi-purpose nylon anchors, so once hole locations are drilled in the wall the fastener system can engage a variety of base materials using the same basic technique. The 1 inch x 2 inch barrels provide a fixed separation between wall and panel, simplifying measurement when repeating hole patterns across multiple signs in a workspace. Studs sized for material up to 3/4 inch thick mean the same hardware arrangement can be used across a range of panel materials, maintaining consistent stand-off distance from piece to piece. The satin clear anodized finish on the aluminum components keeps the visible hardware surfaces matched from cap to barrel.
This 1 x 2 aluminum standoff kit is suited to sign or display installations where the panel needs to stand off the wall at a consistent distance. The 1 inch diameter standard caps give a substantial visual presence that works well with multimedia and workspace components, tying the hardware appearance into other round-profile fittings. Barrels sized at 1 inch diameter and 2 inches long keep the spacing uniform along the wall, so multiple fastening points support the panel evenly and give the finished piece a level, planned look. Studs designed for material up to 3/4 inch thick cover many typical sign substrates, from thinner display panels up to heavier pieces within that thickness range, allowing the same kit to be used across several installations in a facility. The satin clear anodized finish on the Pro Value Series components supports applications where a clean aluminum look complements surrounding fixtures.
The combination of 1 inch diameter caps and 1 inch x 2 inch barrels creates a repeatable geometry, which simplifies layout when multiple signs or panels need the same stand-off depth in a corridor or workspace. Because the SZG4021 standoff kit uses studs sized for material up to 3/4 inch thick, installers can rely on one hardware set to handle varied panel jobs within that range and keep the visual spacing consistent from project to project. The satin clear anodized aluminum finish resists visual variation between caps and barrels, helping repeat installations maintain the same appearance even when components are drawn from different kits over time. Multi-purpose nylon anchors paired with combination screws create a predictable fastening interface in typical wall constructions, so once hole locations are established the same anchoring approach can be applied across a run of signs. As a Pro Value Series product, the complete standoff kit with everything needed to install a sign or display supports efficient repeat work in multimedia and workspace environments.
The 1 inch diameter x 2 inch long satin clear anodized standoff kit is designed to install a sign or display, supporting typical panel-based signage and display boards.
The SZG4021 standoff kit uses studs for material up to 3/4 inch thick, covering many common sign and display panel thicknesses used in multimedia and workspace areas.
The standoff kit uses 1 inch x 2 inch barrels, holding the mounted sign or display panel 2 inches out from the mounting surface for a defined stand-off depth.
This Pro Value Series kit is satin clear anodized aluminum, giving caps and barrels a uniform aluminum appearance that coordinates with many workspace fixtures.
The standoff kit uses combination screws and multi-purpose nylon anchors, allowing the mounting points to engage common wall materials using the supplied fastener-and-anchor pairing.
The 1 inch diameter standard caps clamp the sign or display panel to the barrels, spreading load on the panel face while presenting a clean, finished appearance.
The 1 inch diameter standoff kit, satin clear anodized from the Pro Value Series, aligns with sign and display work that calls for a defined 2 inch stand-off and support for material up to 3/4 inch thick. With standard caps, 1 inch x 2 inch barrels, studs sized for typical panel thicknesses, and combination screws with multi-purpose nylon anchors, the SZG4021 kit delivers a coordinated mounting system for multimedia and workspace components. Select this standoff kit when a consistent aluminum finish and repeatable stand-off geometry are priorities for your installation layout.
