Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1-1/4 inch diameter x 2 inch standoff kit provides a matched set of parts to mount a sign or display with consistent spacing off the wall. The kit uses 1-1/4 inch diameter standard caps that grip the front of the sign, so the mounted panel presents a clean, finished face. Matching 1-1/4 inch x 2 inch barrels hold the sign off the mounting surface, creating a defined 2 inch stand-off that keeps graphics readable and accessible. The system is designed for material up to 3/4 inch thick, so typical sign substrates and panels in that range seat securely between cap and barrel. Satin clear anodized aluminum construction gives a uniform appearance that blends with many closet, garage, and multimedia layouts while identifying the parts as part of the Pro Value Series line.
1-1/4 inch diameter x 2 inch standoff kit relies on the matched 1-1/4 inch caps and 1-1/4 inch x 2 inch barrels to position the sign or display off the wall at a consistent projection, which keeps all corners aligned. Studs for material up to 3/4 inch thick pass through the panel and tie the cap to the barrel, so panels in that thickness range sit snugly without rocking. Combination screws engage the wall surface while the multi-purpose nylon anchors hold in a prepared hole, so the barrels have a stable base. Satin clear anodized aluminum surfaces keep all visible parts uniform in appearance across multiple mounting points in a run of signs or panels.
1-1/4 inch diameter x 2 inch standoff kit is identified for shelf, closet and garage organization, multimedia, and workspace components, so it suits projects where a sign or display must sit slightly off structural panels or walls. In these areas, the 1-1/4 inch diameter standard caps support common sign sizes without tiny point loads, helping nameplates, directional graphics, or layout diagrams sit flat at each mounting point. The 2 inch barrel length works anywhere a defined gap looks appropriate, such as on closet end panels, garage organizers, or workstation panels. Studs set for material up to 3/4 inch thick handle typical panel and sign stock within that range, so one kit can be used on many standard substrates found in these environments.
Manufacturer part SZG4023 identifies this specific Pro Value Series kit, so every cap, barrel, stud, combination screw, and multi-purpose nylon anchor in the description is matched for this assembly. That coordination means the 1-1/4 inch caps align cleanly with the 1-1/4 inch x 2 inch barrels, giving the installed sign or display a square, even offset at all corners. Because the studs are specified for material up to 3/4 inch thick, the pulling force between cap and barrel is centered in the panel, which helps keep the sign tight to the standoffs over time. Combination screws work with the multi-purpose nylon anchors described for this kit, so the barrels have a consistent bearing in the wall or panel substrate. The satin clear anodized aluminum finish on the visible pieces keeps the system visually steady across multiple mounting points, which is useful when repeating the SZG4023 kit throughout a multimedia or workspace layout.
The 1-1/4 inch diameter x 2 inch standoff kit uses studs for material up to 3/4 inch thick, so panels within that thickness range are clamped securely between the cap and barrel.
The standoff kit uses 1-1/4 inch x 2 inch barrels, creating a 2 inch stand-off that spaces the sign or display away from the mounting surface for visual depth and clearance.
The SZG4023 standoff kit is satin clear anodized, giving the aluminum parts a consistent, subdued sheen that coordinates with many closet, garage, and multimedia installations.
The standoff kit is categorized under shelf, closet and garage organization and multimedia and workspace components, aligning it with sign and display mounting in those environments.
The standoff kit uses 1-1/4 inch diameter standard caps and 1-1/4 inch x 2 inch barrels, so both front and rear hardware points share the same width for balanced support.
The SZG4023 standoff kit description specifies combination screws with multi-purpose nylon anchors, so barrels have a matched fastener and anchor pairing for typical wall substrates.
1-1/4 inch diameter x 2 inch standoff kit in satin clear anodized aluminum combines caps, barrels, studs for material up to 3/4 inch thick, combination screws, and multi-purpose nylon anchors into a coordinated Pro Value Series solution. That alignment of parts under manufacturer number SZG4023 supports repeatable mounting of signs or displays across shelf, closet, garage, multimedia, and workspace projects. For installers and serious DIY users planning runs of panels at a consistent 2 inch projection, this dedicated standoff kit keeps the hardware choice straightforward so jobs move cleanly from layout to fastening.