Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1/2 inch standoff kit stainless steel gives you a matched set of parts to mount small signs or displays in one step, so layout stays consistent from fastener to fastener. The Pro Value Series stainless steel construction provides a clean, metallic look that suits multimedia and workspace components where a finished appearance matters. The 1/2 inch diameter x 1/2 inch long size creates a compact stand-off from the wall, which keeps smaller panels close to the surface while still reading as a dimensional installation. The complete standoff kit format means barrels, caps, studs, wood hanger screws, and multi-purpose nylon anchors are sized to work together, reducing trial-and-error during installation. With components built around material in either 1/8 inch or 1/4 inch thickness, this kit supports two common sign panel sizes in shop, office, or garage organization projects without changing your basic mounting method.
Wood hanger screw standoff mounting in this SZG4026 kit lets you drive directly into suitable wood substrates, so wall, casework, or panel installs use a familiar fastening process. Multi-purpose nylon anchors expand available mounting options to solid surfaces that can accept anchors, keeping the same cap, barrel, and stud geometry even when the base material changes. Studs sized for 1/8 inch thick material seat thin panels accurately in the barrel, which helps the cap engage fully without crushing lighter sign stock. Separate studs for 1/4 inch thick material handle heavier panels, so the thread engagement and panel grip stay appropriate to the thicker sign. Because the caps, barrels, studs, screws, and anchors are designed around the same 1/2 inch x 1/2 inch standoff format, each connection point assembles in the same sequence, which supports predictable, repeatable workflow on multi-sign runs.
This 1/2 inch diameter x 1/2 inch long standoff kit fits projects built around shelf, closet, and garage organization, as well as multimedia and workspace components where small signs or panels clarify layout. The stainless steel finish pairs well with other metal hardware commonly used in these environments, so signs, labels, or graphic panels tie into surrounding fixtures. With studs dedicated to 1/8 inch material, thin acrylic or similar panels can be used for identification or simple graphics while still seating correctly against the barrels. For heavier-duty or more substantial panels, the studs for 1/4 inch material allow thicker signs in the same hardware layout, so a shop can mix panel thicknesses without reworking hole locations. Wood hanger screws integrate this kit into wooden casework, rails, or blocking found in closets and garages, while the multi-purpose nylon anchors extend similar installations to wall materials that accept anchors.
The Pro Value Series SZG4026 part number ties a specific 1/2 inch x 1/2 inch stainless steel configuration to repeat jobs, so reordering keeps dimensions and appearance consistent across future installations. Standard caps at 1/2 inch diameter give installers a clear drilling target on the sign face, which reduces layout time when creating multi-point mounting patterns. Matching 1/2 inch x 1/2 inch barrels keep the standoff height uniform at each point, which helps signs sit square and level against the wall plane when your substrate is properly prepared. Having both 1/8 inch and 1/4 inch material studs in the same kit supports quick panel selection on a project-by-project basis, because the hardware already matches two common thicknesses. Wood hanger screws and multi-purpose nylon anchors being part of this same system mean the fastening interface stays consistent, so installers can move between wood and anchor-ready surfaces while retaining the same visual spacing and hardware layout.
The 1/2 inch diameter x 1/2 inch long standoff kit works with panel materials either 1/8 inch thick or 1/4 inch thick, so signs using those thicknesses seat correctly on the supplied studs.
The standoff kit uses wood hanger screws for wood mounting surfaces, which lets the barrels tie directly into wood casework, blocking, or framing in closet and garage organization projects.
The multi-purpose nylon anchors allow the standoff kit to mount to solid materials that accept anchors, so installers can keep the same 1/2 inch standoff geometry on non-wood walls.
The stainless steel 1/2 inch caps and 1/2 inch x 1/2 inch barrels provide the visible hardware and stand-off distance, creating a compact, consistent gap between the panel and mounting surface.
The standoff kit supplies dedicated studs for 1/8 inch thick material and separate studs for 1/4 inch thick material, so each panel thickness engages properly without over- or under-clamping.
The manufacturer part number SZG4026 and description SOK-SS50-1500, STANDOFF KIT, .5 x .5, SS identify this specific 1/2 inch diameter x 1/2 inch long stainless steel standoff setup.
The 1/2 inch standoff kit stainless steel from the Pro Value Series brings caps, barrels, studs, wood hanger screws, and multi-purpose nylon anchors together around a single 1/2 inch x 1/2 inch format, so sign and display mounting follows one consistent approach across wood and anchor-ready surfaces.
