Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
edge grip kit from the Pro Value Series provides a standoff-style way to install photos, artwork, or glass using edge pressure instead of drilling through the material, which helps preserve the panel surface on display projects. The kit uses 1-1/4 inch diameter edge grips, so each point of support presents a substantial bearing area against the material edge for stable holding on walls or display surfaces. Each edge grip is 1-1/2 inch long, giving extra engagement along the edge that helps distribute load when supporting pieces weighing up to 20 pounds. The satin clear anodized aluminum finish on the edge grips creates a neutral metallic appearance that suits multimedia, office, or retail environments while also providing a treated surface on the aluminum. Because the edge grips hold material from 1/8 inch up to 3/4 inch thick, one kit can serve a wide range of panel thicknesses on signage, framed work, or glass panels.
This aluminum edge grip kit uses standoff-style mounting so photos, artwork, or glass are held by their edges, which lets the visible faces stay un-drilled for a cleaner presentation. Each edge grip works with material from 1/8 inch up to 3/4 inch thick, so the same kit can be applied to thin photo panels or thicker glass and composite panels without changing hardware type. The 1-1/2 inch length of the grips sets a consistent projection for each support point, which helps keep framed work or glass aligned in plane on the wall or mounting surface. With capacity for pieces weighing up to 20 pounds, the SZG4030 kit serves many small to medium display applications often found in multimedia and workspace components.
This Pro Value Series aluminum edge grip kit fits naturally into shelf, closet, and garage organization layouts where signage or decorative panels are part of the installation, because it is classified under standoffs for multimedia and workspace components. By holding photos, artwork, or glass at the edge, it allows a clean-faced presentation on wall or casework surfaces often used in offices, retail zones, and organized garages. The 1-1/4 inch diameter grips create a visible, deliberate mounting detail that pairs well with other exposed hardware, so installers can integrate it into modern shelving or display runs. Its ability to handle panels from 1/8 inch to 3/4 inch thick means one SZG4030 kit can move between lightweight graphic panels in workspaces and thicker glass or laminated pieces in more permanent displays without changing product families.
The fact that these edge grips do not require drilling through the photo, artwork, or glass lets installers position and reposition display pieces without altering the material, which speeds layout changes and reduces rework when content changes. Because artwork changes become easier and faster with this kit, facilities that rotate displays can reuse the same hardware while swapping media within the 1/8 inch to 3/4 inch thickness range. The 1-1/4 inch diameter and 1-1/2 inch length give each support point a predictable geometry, which helps with consistent spacing, repeated layouts, and aligning multiple panels across a wall. Supporting pieces up to 20 pounds means one SZG4030 kit covers many standard panel sizes used in professional and DIY projects, which simplifies planning when multiple displays must fall within a known weight window. The satin clear anodized aluminum finish presents a neutral hardware appearance that coordinates with other metal fittings in woodworking and storage environments, helping projects read as a unified installation.
The edge grip kit supports photos, artwork, or glass from 1/8 inch to 3/4 inch thick, so it works across many common display materials in multimedia and workspace projects.
The SZG4030 edge grip kit is rated for pieces weighing up to 20 pounds, which covers many small to medium photo, artwork, or glass display panels.
Each edge grip in the kit has a 1-1/4 inch diameter and a 1-1/2 inch length, providing substantial bearing area and projection for stable mounting.
The edge grip kit holds panels by the edge without drilling into them, which makes changing artwork easier and faster when display content is updated.
The edge grips have a satin clear anodized aluminum finish, giving a neutral metallic appearance that fits many shelf, closet, and workspace layouts.
This specific aluminum edge grip kit is identified by manufacturer part number SZG4030, which ties it to the Pro Value Series standoffs line.
This aluminum edge grip kit from the Pro Value Series gives installers an SZG4030 solution for holding photos, artwork, or glass by their edges, keeping faces intact while handling panels from 1/8 inch to 3/4 inch thick and up to 20 pounds. For shelf, closet, garage, or workspace display runs where hardware appearance and straightforward changes matter, choose this 1-1/4 inch diameter by 1-1/2 inch long satin clear anodized edge grip kit to support consistent layouts across multiple projects.
