Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1 inch aluminum panel clip kit from the Pro Value Series provides a flush mount solution for signs, artwork, or mirrors when you want the panel tight to the wall. The flush mount design holds the panel against the surface, which keeps the installation low-profile for a clean finished look. Brushed aluminum discs are part of the system, so the visible face has a consistent metal appearance that suits multimedia and workspace applications. Satin clear anodized aluminum construction gives the components a uniform, neutral finish that coordinates with a wide range of wall and panel materials. The kit is identified by manufacturer part SZG4031, which lets you match this exact setup across multiple jobs. This setup is designed around panel clips and finishing discs working together, so the wall side and panel side stay aligned during mounting.
This flush mount kit uses brushed aluminum discs that attach with VHB, so the panel side bonds without drilling through the sign, artwork, or mirror. Avoiding panel drilling helps preserve printed graphics, glass, or finished faces that would be weakened or marked by holes. The 1 inch diameter panel clips act as the mating components, so once the discs are bonded with VHB, the panel locates to the clips at the set points. Vinyl shims at 1/16 inch thickness are part of the system, supporting fine adjustment of stand-off distance and alignment at each mounting location. Installation screws in #8 size at 1-1/2 inch length and multi-purpose nylon anchors are specified, so the wall side uses standard fastener geometry that suits typical drilled anchors.
This 1 inch aluminum panel clip kit is described for mounting a sign, artwork, or mirror flush against a wall, so it suits visual displays where the panel should read as part of the surface. The flush mount layout keeps the panel close to the wall, which is useful in narrow corridors or work areas where protruding hardware could interfere with traffic. Brushed aluminum discs make sense in multimedia and workspace environments, because the metal face ties into other aluminum or steel components. The satin clear anodized aluminum finish holds a neutral color tone, so the hardware blends with both light and dark substrates in closets, offices, or garage organization zones. Panel clips set at 1 inch diameter give installers a predictable footprint to space and locate mounting points, which helps create consistent reveal lines across multiple panels.
The use of VHB on the brushed aluminum discs eliminates through-panel holes, which keeps the structural and visual integrity of glass, acrylic, or finished panels intact during mounting. Because the discs are metal and the bond is provided by VHB, the connection at the panel face stays flat, which helps each location seat evenly onto the panel clips. The 1 inch diameter of the panel clips defines a repeatable interface, so once spacing and layout are confirmed on one project, the same pattern can be repeated on similar jobs using SZG4031 kits. Vinyl shims at 1/16 inch thickness give a simple way to fine-tune plane alignment between multiple clips, which reduces rocking and helps the panel sit solid against the wall. The specified 1-1/2 inch #8 installation screws, paired with multi-purpose nylon anchors, create a consistent fastening stack, so drill sizes and depth targets remain the same across locations on the wall.
The 1 inch aluminum panel clip kit creates a flush mount for a sign, artwork, or mirror against a wall, so panels sit tight to the surface for a low-profile presentation.
The brushed aluminum disc bonds to the panel with VHB, so the panel is secured without drilling, protecting finished faces and keeping graphics or glass intact at the mounting points.
The 1 inch diameter panel clips define a controlled contact area, so each mounting point has a predictable footprint and installers can lay out repeated positions across similar panels.
The 1/16 inch vinyl shims adjust stand-off and alignment at each mount, so panels can be leveled and seated firmly without rocking between multiple clip locations.
The 1-1/2 inch #8 screws with multi-purpose nylon anchors establish a consistent wall fastening setup, so holes and depths can follow the same pattern on every mounting point.
The SZG4031 part number identifies this specific Pro Value Series flush mount clip kit, so projects can repeat the same hardware specification wherever matching mounts are required.
This Pro Value Series 1 inch aluminum panel clip kit in satin clear anodized is set up for flush mounting signs, artwork, or mirrors with VHB-bonded discs and matching panel clips. The combination of 1 inch panel clips, brushed aluminum discs, 1/16 inch vinyl shims, 1-1/2 inch #8 screws, and multi-purpose nylon anchors gives a defined method from wall fastening through to panel location. Using the SZG4031 part number keeps this same configuration available across repeat jobs where a consistent, low-profile wall mount is required.
