Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Grass Dynapro 2.0 18" undermount drawer slide delivers full-extension travel and integrated soft-close in a concealed mounting position, sized specifically for drawer boxes built with 3/4" (19mm) sides and rated at 100 lb per pair.
An 18" Dynapro 2.0 pairs naturally with medium-depth cabinetry: standard kitchen base drawers, bathroom vanities with deeper boxes, and furniture pieces where the drawer depth runs in the 18" range. Full extension matters most here — pots, pans, file folders, and shop supplies at the back of a loaded drawer should be reachable without stretching. The 100 lb per pair rating covers the everyday working load for those applications without overspending on a heavy-duty tier.
In frameless cabinets the slide mounts directly to the interior panel. Face-frame installations require rear mounting brackets, which are Dynapro-specific and sold separately — plan for them before finalizing the order for a framed cabinet build.
The Dynapro 2.0's body is steel with a zinc finish, which handles the indoor environment of residential and light commercial cabinetry reliably over years of cycling. The roller bearing system runs on precision rollers rather than ball bearings — a design choice Grass uses in the Dynapro line to deliver smooth, consistent travel under load. The integrated soft-close damper is built into the slide itself, so there is no separate adapter to source, mount, or replace.
The 3/4" (19mm) side-thickness specification is structural, not cosmetic: the locking devices that secure the drawer box to the slide are engineered around that dimension. Using this version with 5/8" (16mm) drawer sides will not produce a correct fit — Grass offers a separate 5/8" version for those builds.
Cabinet shops running production lines with 3/4" drawer stock reach for this slide when the spec calls for a clean undermount look, full rear access, and a soft close — all without adding a motion adapter as a separate component. Designers specifying kitchen and bath projects find the Dynapro 2.0 a reliable middle tier: more refined than an epoxy Euro slide and straightforward to specify without custom hardware. Contractors and installers working on residential renovations appreciate that the soft-close is already built in, reducing the number of parts to track on the jobsite.
Yes, but face-frame installations need Dynapro rear mounting brackets to support the back end of the slide. Those brackets are series-specific and sold separately — they are not a universal fit from another brand or slide family.
The Grass Tipmatic Soft-close set is compatible with Dynapro 2D/3D slides and adds push-to-open while retaining the soft-close action. It is a separate purchase and assembles tool-free. Note that the 9" slide length is excluded from Tipmatic compatibility, but the 18" length falls well within the supported range.
Undermount slides in the Dynapro line are typically sold as a pair (one drawer requires one pair). Confirm the sold-as unit on the product listing before adding to your order to avoid a half-order.
Yes. The box must be built to the Dynapro nominal length specification — an 18" slide calls for an 18" nominal drawer length. The rear of the box also requires the notch and locking-device drilling that Grass specifies for this slide. Build to the published spec; an unmodified box will not seat correctly on an undermount slide.
Only if your drawer sides are 3/4" (19mm) thick. Grass makes a separate Dynapro 2.0 version for 5/8" (16mm) sides, and the two are not interchangeable. Check your drawer side thickness before ordering.
Built for 3/4" drawer stock, the Grass Dynapro 2.0 at 18" delivers full extension, 100 lb capacity, and integrated soft-close in one drawer slide — no adapters, no separate motion components, and nothing visible when the drawer is open.
Sold In: 1 Set