Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand narrow front locking device for the Knape & Vogt Samet undermount drawer slide system, designed to secure the drawer box front to the slide with two-axis adjustment in a gray plastic housing that blends into light-colored cabinet interiors.
The front locking device is what connects the drawer box to the undermount slides at the front edge. Without it, the drawer cannot seat on the runners or release cleanly. On the Samet system, the right-hand and left-hand devices clip under the drawer front at each corner, locking the box onto the slides and giving the installer the two-axis adjustment needed to dial in the gap between the front and the cabinet face frame or case edge. The narrow profile matters here: in layouts where the drawer front leaves limited clearance at the sides, the narrow body fits where a wider device would bind or prevent full seating.
The housing is molded plastic in a neutral gray — a practical choice for a component that lives hidden beneath the drawer front. Gray reads as background color in most interior palettes, so it does not draw attention through the gap if the drawer is slightly open. Plastic construction keeps the part light and resistant to the minor moisture and cleaning-product exposure common in kitchen and bath cabinet interiors.
This device is the replacement or completion part for a shop or installer who is working with the Knape & Vogt Samet undermount slide system and needs the right-hand narrow locking device specifically. Cabinet shops running Samet slides in production will recognize this as a consumable accessory that gets ordered alongside the slides themselves. Renovation contractors replacing a failed or missing clip on an existing Samet installation will want to confirm the series match before ordering — Samet locking devices fit Samet slides, and the narrow version is not the same as the standard-width device in the same series.
No. Front locking devices are engineered to each brand and series. This device fits the Samet undermount system from Knape & Vogt and is not compatible with Blum, Grass, Hettich, or other manufacturers' slides.
Yes. This is the right-hand member only. A complete drawer front fixing requires one right-hand and one left-hand locking device — order both to finish the install.
The narrow profile is specified when the drawer front geometry or cabinet construction limits the space at the front corners. Check the Samet slide documentation or compare the device width to your existing hardware if you are replacing a clip — narrow and standard-width versions are not interchangeable within the series.
After the drawer is hung on the slides, the locking device allows the front to be moved in two directions — typically height and side-to-side — so you can close up uneven reveals without removing the drawer box.
A missing or mismatched locking device stops a drawer installation cold. Having the correct Samet right-hand narrow front locking device on hand means the drawer goes in on the first attempt, the front adjusts cleanly, and the cabinet ships on time.
Sold In: 1 Each
