Adaptive Cutting System saw blade identifies this 6-1/2 inch, 48-tooth, carbide-tipped circular saw blade designed for the Kreg Tool Adaptive Cutting System, so it supports controlled cutting in a shop or jobsite setup. The 48-tooth configuration is engineered for ripping or crosscutting solid wood, plywood, and other sheet goods, which helps one blade handle common panel and lumber breakdown. The carbide-tipped teeth are built for cutting wood-based materials while maintaining sharp cutting edges, so they support consistent performance across repeated cuts. The 6-1/2 inch, or 165mm, diameter pairs with the Adaptive Cutting System saw to maintain the intended cutting depth and track performance. A 20mm arbor hole matches saws accepting that bore, so the blade centers securely during installation and cutting. The 2.2mm-wide kerf limits material removal, which supports smoother feed pressure and more efficient use of stock.
This 6-1/2 inch, 165mm diameter blade with a 20mm arbor hole installs on circular saws configured for that bore, so the blade centers on the arbor and supports accurate rotation. The circular saw blade format allows the blade to mount on the Adaptive Cutting System saw, so the carbide-tipped 48-tooth design works with the system to cut solid wood, plywood, and other sheet goods. The 2.2mm-wide kerf defines the cut width during setup, so measurement for layouts and cut lines can account for the material removed by the blade. The laser-cut steel body supports precise manufacture of the arbor and body geometry, so the blade tracks consistently once mounted and tightened to the saws arbor.
The 48-tooth, carbide-tipped configuration is specified for ripping and crosscutting solid wood, plywood, and other sheet goods, so one blade can cover common cabinet, furniture, and built-in woodworking tasks. The carbide-tipped teeth contact the workpiece with a durable cutting edge, so the blade maintains its cutting capability on dense plywood or composite sheet material. The 6-1/2 inch (165mm) diameter keeps the tooth speed and cutting depth matched to the Adaptive Cutting System, so the saw and blade combination delivers controlled passes rather than overly aggressive cuts. The 2.2mm-wide kerf defines a relatively narrow cut, so edges on plywood and sheet goods experience less material breakout along the cut path.
The laser-cut steel body is manufactured with anti-vibration slots, which help the blade run with smooth, quiet operation under load so the saw feels more stable along guides or fences. The steel body provides a rigid base for the carbide-tipped teeth, so tooth alignment stays consistent as the blade rotates at speed. The anti-vibration slots interrupt vibration patterns in the body, so the blade tracks straighter and reduces chatter marks in solid wood or plywood surfaces. The 20mm arbor hole is precisely cut into the steel body, so the blade locates firmly on the arbor and resists wobble that could affect cut accuracy. Together, these construction details allow the blade to support repeatable results when ripping or crosscutting sheet goods and solid lumber within the Adaptive Cutting System.
The Kreg ACS705 saw blade is designed for ripping or crosscutting solid wood, plywood, and other sheet goods, so it supports typical woodworking and panel-processing tasks in the shop.
The 48 tooth carbide tipped design provides a balance of cutting speed and cut quality, so it can handle both ripping and crosscutting while maintaining durable, sharp edges on wood-based materials.
The 6-1/2 inch, or 165mm, diameter matches the Adaptive Cutting System format, so cutting depth and saw control remain consistent with the systems intended performance.
The 20mm arbor hole allows the blade to mount on saws with a 20mm arbor, so it seats securely on the shaft and supports stable, accurate rotation during cutting.
The 2.2mm wide kerf means the blade removes less material in each pass, so feeding through solid wood or plywood requires less effort and preserves more usable stock width.
The laser cut steel body with anti vibration slots promotes smooth, quiet operation, so the blade tracks steadily and reduces vibration-related marks in the cut surface.
The Adaptive Cutting System saw blade identified as Kreg Tool ACS705 combines a 6-1/2 inch, 165mm diameter with 48 carbide-tipped teeth, so it supports ripping and crosscutting solid wood, plywood, and other sheet goods. The 20mm arbor hole and 2.2mm-wide kerf define how it mounts and cuts, so layouts and setups can be planned around its specific cut width and fit. The laser-cut steel body with anti-vibration slots promotes smooth, quiet operation, so the blade integrates well into an Adaptive Cutting System workflow focused on accurate, repeatable results.
Sold In: 1 Each