Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Overton pull 96mm is a decorative cabinet pull from Amerock Corporation designed for cabinet doors and drawers. The 3-3/4 in (96 mm) center-to-center spacing sets the mounting hole layout, which streamlines drilling and consistent placement across a run of cabinets. The pull length of 4-15/16 in gives good hand clearance along the face of the cabinet, supporting repeated daily use. A projection of 1-1/8 in sets the standoff from the door or drawer front, which provides finger clearance while helping keep knuckles away from adjacent surfaces. The width of 11/16 in defines the grip profile, giving a slim, clean line on the face of the cabinet. As part of the Overton collection, this pull supports a coordinated look wherever the same series is used.
The 3-3/4 in (96 mm) center-to-center dimension defines the distance between mounting points, which is the critical measurement when aligning with pre-bored cabinet fronts. The overall length of 4-15/16 in determines how much of the cabinet rail or stile is covered, which influences spacing between adjacent pulls on narrow fronts. With a projection of 1-1/8 in, the pull stands off from the surface at a fixed depth, which shapes both hand clearance and how far the hardware extends into walk paths. The 11/16 in width sets a slim face dimension, which can be useful when pairing this pull with narrower frame members or when a more refined visual line is desired.
The Amerock Overton Series 3-3/4 in (96 mm) center-to-center pull is positioned for use on cabinets where a decorative handle is required. Its place in the Decorative Hardware & Moldings category, under Handles and Pulls, defines its role as a primary operating point for doors and drawers. The farmhouse styling inspiration in the Overton collection description positions this pull for projects following that design direction, such as kitchen cabinets, laundry built-ins, or similar casework. The mixed brushed matte black and brushed gold finish described for this model supports visual ties to lighting, appliances, or plumbing fixtures that use related finishes. As a zinc/aluminum pull within the Amerock Overton collection, it can be used wherever matching Overton pieces are specified for a consistent look across multiple cabinet banks.
The 3-3/4 in (96 mm) center-to-center mounting dimension is a standard drilling pattern, which simplifies cabinet layout when repeating this pull across many fronts. Using a consistent 96 mm boring pattern helps keep handle locations uniform from door to door, supporting a clean finished appearance. The specified length of 4-15/16 in allows installers to predict end clearances to adjacent doors or walls, helping plan spacing when cabinetry lines run tight. A projection of 1-1/8 in gives a known stand-off, which matters where drawer faces pass near trim or appliances, reducing guesswork about clearance. The 11/16 in width defines a relatively narrow grip footprint, which can be important on smaller drawer fronts or narrow rails. The precise Amerock part number BP36681BMBBGL clearly identifies these details, which supports consistent ordering for large kitchen or commercial millwork runs.
The Amerock Overton pull has a 3-3/4 in (96 mm) center-to-center size, which sets the drilling pattern for mounting and aligns with standard 96 mm cabinet boring layouts.
The Overton pull length is 4-15/16 in, with a projection of 1-1/8 in and a width of 11/16 in, giving a slim profile with defined stand-off from the cabinet face.
The Amerock Overton pull uses zinc/aluminum material, providing a solid metal body suited to repeated use on cabinet doors and drawers in everyday applications.
The BP36681BMBBGL pull has a brushed matte black and brushed gold finish, creating a split look that coordinates with other fixtures using similar tones.
The farmhouse styling inspiration positions the Overton pull for projects aiming at that design direction, such as kitchens or built-ins needing a coordinated decorative hardware look.
The BP36681BMBBGL part number identifies this specific Amerock Overton pull with 96 mm center-to-center, zinc/aluminum construction, and the brushed matte black / brushed gold finish combination.
The Amerock Overton Series 3-3/4 in (96 mm) center-to-center pull offers a defined mix of dimensions, material, and finish for cabinet projects. The brushed matte black and brushed gold split finish, zinc/aluminum body, and standard 96 mm center spacing combine into a predictable hardware choice for doors and drawers following the Overton farmhouse styling. For cabinet runs needing a consistent decorative handle across multiple fronts, this Amerock BP36681BMBBGL pull provides the stated sizing and finish needed to plan drilling layouts and visual alignment.