Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Overton cabinet pull is a 5-1/16 in (128 mm) center to center handle that spans typical cabinet door and drawer drill patterns, which helps keep layout straightforward on both new builds and retrofits. The pull uses a brushed gold and satin nickel split finish, so one piece visually ties together warm and cool metal finishes in the same kitchen or bath run. Its 6-3/16 in overall length gives enough hand clearance across wider drawer fronts while still fitting smaller cabinet faces. The 1-1/8 in projection creates space for fingers without sticking too far off the face, supporting comfortable use on frequently opened doors. A 11/16 in width provides a slim front profile that sits neatly on rails and stiles, helping maintain clean lines across the project.
The 5-1/16 in (128 mm) center to center mounting dimension lines up with a widely used boring pattern, so this pull can often occupy existing holes on replacements or match standard jig settings on new work. An 8-32 x 1-1/2 in screw size is specified, which pairs with typical cabinet door and drawer front thicknesses where machine-screw mounting is expected. The 1-1/8 in projection keeps the grip away from the face enough that fingers clear raised profiles, helping doors and drawers open without knuckle contact against trims or panel details. With 6-3/16 in length and 11/16 in width, the pull covers the immediate area around the bore pattern, which can visually mask minor chipping or wear at the hole edges.
The Amerock Overton series 5-1/16 in (128 mm) center to center pull is built around a brushed gold and satin nickel finish pairing, so it suits projects that blend warm and cool metals across the same room. The zinc/aluminum material construction provides a metal body that supports use on frequently operated kitchen, bath, or utility cabinets. Its farmhouse-inspired styling means the pull works well on shaker fronts, beaded frames, and simple slab doors where straight lines and soft edges are preferred. With a 6-3/16 in overall length, the handle spans medium-width rails and typical drawer fronts, giving a proportion that reads neither undersized nor oversized across common cabinet sizes.
The 11/16 in width lets this zinc/aluminum cabinet handle sit comfortably on narrow drawer fronts or stiles, supporting use on upper cabinets where rail height is limited. A 1-1/8 in projection suits doors near walls or appliances, because the pull stands out enough for fingers without creating excessive reach that could interfere with nearby surfaces. The manufacturer part number BP36682BGLG10 ties this exact size and finish combination to ordering and job documentation, which helps keep multiple pulls on a project consistent. As part of the Overton collection, this handle allows a run of cabinets to carry the same profile while the mixed finish coordinates with both brushed gold and satin nickel fixtures.
The 5-1/16 in (128 mm) center to center dimension on this Overton 128mm center to center pull establishes a repeatable drilling pattern, helping installers maintain consistent spacing across doors and drawers. Using a standard 8-32 x 1-1/2 in screw size aligns with common shop and field practice, which streamlines hardware changes when multiple pulls share the same thread and approximate door thickness. The 6-3/16 in total length gives a predictable distance from end to end, aiding in alignment when matching sightlines across banks of drawers or tall pantry doors.
The 1-1/8 in projection offers a consistent hand feel from cabinet to cabinet, so users experience the same clearance and grip whether they are opening a base unit or a wall cabinet. At 11/16 in width, the handle presents a controlled visual band on the face of the cabinet, making it easier to keep a clean rhythm of hardware along long runs of doors. The brushed gold and satin nickel finish pairing repeats identically from pull to pull, supporting uniform appearance when dozens of BP36682BGLG10 cabinet handles are specified on a single project. With zinc/aluminum construction behind that finish, the pull delivers a solid metal touch that aligns with expectations on decorative cabinet hardware lines.
The Amerock Overton series pull uses a 5-1/16 in (128 mm) center to center drilling pattern, which matches a standard bore spacing for many cabinet doors and drawer fronts.
The BP36682BGLG10 cabinet handle has a 6-3/16 in overall length, giving a balanced span across typical cabinet rails and drawer fronts.
This Amerock Overton cabinet pull has a 1-1/8 in projection, positioning the grip away from the door face so fingers clear the cabinet surface during use.
The pull uses a brushed gold and satin nickel finish pairing, allowing one handle style to coordinate with fixtures that use either of those finishes.
The Overton 128mm center to center pull is made from zinc/aluminum, providing a metal body suited to decorative cabinet hardware applications.
This Amerock Overton pull is specified with an 8-32 x 1-1/2 in screw size, aligning with common machine-screw mounting for cabinet doors and drawers.
The Amerock Overton series 5-1/16 in (128 mm) center to center pull combines a brushed gold and satin nickel finish with zinc/aluminum construction, giving one handle that ties mixed metal schemes together. Its 6-3/16 in length, 1-1/8 in projection, and 11/16 in width support consistent layout and hand feel across doors and drawers. With the BP36682BGLG10 cabinet handle specification, projects can repeat the same size and finish across an entire run of cabinets. Use this pull when a standard 128 mm drilling pattern and a mixed warm-cool metal look are both priorities on the job.
Sold In: 1 Each