Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Overton 128mm cabinet pull is a mixed-finish handle designed for cabinet doors and drawers where a finished, visible grip is required. The pull is part of the Overton collection, so it follows a consistent design language across that line. Its center-to-center mounting dimension of 5-1/16 in (128 mm) defines the hole spacing, which is important when drilling new fronts or reusing existing bores on replacement jobs. The overall length of 6-3/16 in gives the hand a clear grip area, which matters on heavier doors and wider drawer fronts. A projection of 1-1/8 in sets the standoff from the cabinet face, giving finger clearance without the handle sticking too far into walk paths. The 11/16 in width presents a slim profile on the face of the cabinet, which helps the pull read as a defined design element rather than a bulky block.
The 5-1/16 in (128 mm) center-to-center measurement gives a precise drilling dimension, which helps installers set jigs or templates for repeatable hole spacing from cabinet to cabinet. The pull uses 8-32 x 1-1/2 in screw sizing, which matches a standard cabinet hardware thread and length for typical door and drawer thicknesses. With a projection of 1-1/8 in, the pull extends from the face just enough for a comfortable grasp, which matters when working with full overlay doors where fingers approach from the side. The 11/16 in width keeps the footprint narrow on the face, which can simplify alignment on narrow rails or stiles. The satin nickel / polished chrome finish pairing on a single body means the finish effect is built into the installed piece, so visual results are defined by the factory-applied surfaces rather than field finishing.
The pull belongs to the Amerock Overton collection, so it fits projects that use that farmhouse-inspired styling across multiple openings. Its role as a handle in the Decorative Hardware & Moldings category positions it for cabinet doors and drawers in residential or similar environments where visible decorative hardware is part of the design. The satin nickel / polished chrome finish pairing makes the pull suitable for layouts that already feature those finishes on lighting, appliances, or plumbing fixtures, because the pull surface is designed to relate to both brushed and bright metals. With a 5-1/16 in (128 mm) center-to-center dimension, the pull matches layouts that follow metric-based drilling while still reading as a standard 5-1/16 in size, which is useful on projects mixing different hardware sources. The overall 6-3/16 in length gives a proportional look on common cabinet widths, so the pull can run in straight lines across a bank without appearing undersized.
The defined 5-1/16 in (128 mm) center-to-center spacing allows jigs or CNC programs to rely on a fixed number, which reduces layout variation and supports clean alignment across multiple fronts. The 1-1/8 in projection keeps the hand away from the cabinet face as the door opens, which helps limit finger contact with finished surfaces during repeated use. A width of 11/16 in keeps the pull visually lightweight, so it can be lined up closely on narrow drawer faces without crowding the panel. The satin nickel / polished chrome mixed finish is engineered into the pull, so the contrast between the two finishes is consistent unit to unit, which matters on long runs of cabinets viewed together. The zinc/aluminum material gives the body a metal feel rather than a soft material, which supports a firm grip when pulling heavier drawers. The Amerock BP36682G1026 part number clearly identifies this exact configuration, which simplifies reordering when matching hardware on later phases or service work.
The Amerock Overton 128mm cabinet pull has a 5-1/16 in (128 mm) center-to-center size, which sets the drilling distance between mounting holes for consistent cabinet and drawer layouts.
The Amerock BP36682G1026 pull has an overall length of 6-3/16 in, giving a grip span that suits standard cabinet doors and drawers without overwhelming the front.
The Overton pull uses a satin nickel / polished chrome finish combination, so the hardware visually connects with both brushed nickel and bright chrome elements in a room.
The Overton 5-1/16 inch center pull is made from zinc/aluminum, providing a metal construction that feels solid in the hand on frequently used cabinet fronts.
The Amerock Overton cabinet pull projects 1-1/8 in from the cabinet surface, creating finger clearance while keeping the hardware close to the face for a neat profile.
The cabinet pull uses 8-32 x 1-1/2 in screws, aligning with standard cabinet hardware threading and length for typical door and drawer thicknesses.
The Amerock Overton 128mm cabinet pull brings a satin nickel / polished chrome finish combination, a 5-1/16 in (128 mm) center-to-center layout, and a 6-3/16 in overall length together in one handle, which suits projects tying multiple metal tones into unified cabinet runs. For cabinets that follow the Overton collection styling and need a zinc/aluminum pull with a 1-1/8 in projection and 11/16 in width, this BP36682G1026 model delivers those defined dimensions in a single, repeatable specification.
Sold In: 1 Each