
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Overton cabinet pull is a zinc and aluminum handle designed for cabinet applications where a decorative pull is needed. The 6-5/16 in (160 mm) center-to-center drilling creates a consistent hole pattern that supports straightforward layout across doors and drawers. The total length of 7-7/16 in gives this pull a substantial hand feel that helps users grasp and operate cabinet fronts comfortably. A projection of 1-1/8 in spaces the grip away from the cabinet face so fingers clear the door surface during opening. The 11/16 in width presents a slim profile that keeps the pull visually light while still offering defined edges for a solid grip. The brushed matte black and brushed gold mixed finish ties into both dark and warm-toned elements on the project, allowing one pull style to coordinate with multiple finish choices.
The 6-5/16 in (160 mm) center-to-center measurement defines where mounting holes are drilled, allowing shop jigs or onsite templates to be set once and reused across cabinet runs. This repeatable spacing helps maintain straight visual lines when multiple pulls are installed. With a total length of 7-7/16 in, the pull extends past the hole locations enough to visually anchor wider fronts while still fitting standard door and drawer widths. The 1-1/8 in projection determines how far the pull stands off the face, which affects both finger clearance and how the hardware reads in profile on flush fronts. At 11/16 in width, the pull occupies a modest band on the rail or stile, leaving surrounding finish exposed so wood grain or paint color remains visible around the hardware.
The Amerock Overton series pull with 6-5/16 in (160 mm) center-to-center drilling functions as a decorative handle for cabinet doors and drawers using this standard spread. The brushed matte black and brushed gold finish combination allows this pull to visually bridge dark cabinet colors and warm-toned fixtures in the same room, helping maintain a unified design across a project. The overall length of 7-7/16 in suits medium to larger fronts, placing the user's hand further from the door edge, which can feel more controlled when operating wider cabinet faces. The 1-1/8 in projection positions the hand away from finished surfaces during use, limiting contact with paint or stain as cabinets are opened. Zinc and aluminum construction gives the pull a metal build typical of decorative cabinet hardware, so it integrates naturally with other metal elements on the installation.
The 6-5/16 in (160 mm) center-to-center measurement offers a clear reference dimension that simplifies layout, especially when drilling in batches or using story sticks to repeat hole locations. This fixed drilling distance helps installers keep hardware lined up across upper and base cabinets, which is critical when long banks of cabinets share sightlines. The 11/16 in width lets the pull sit comfortably on narrower rails without crowding edge profiles, supporting balanced placement on framed or frameless fronts sized to accept this width. The 1-1/8 in projection defines the standoff necessary for fingers to pass behind the bar, contributing to easier operation for various hand sizes. With the brushed matte black and brushed gold finish combination, one pull style can visually tie together mixed metal elements, which can simplify finish selection when coordinating cabinets with lighting, appliances, or plumbing fixtures that use similar tones.
The Amerock Overton BP36683BMBBGL pull has 6-5/16 in (160 mm) center-to-center spacing, a 7-7/16 in overall length, 1-1/8 in projection, and 11/16 in width, giving clear references for cabinet drilling and layout.
The 6-5/16 in center-to-center measurement sets a repeatable hole spacing that suits jigs or templates, supporting straight, consistent alignment of pulls across doors and drawer fronts.
The Overton pull uses a brushed matte black and brushed gold finish combination, allowing one handle style to coordinate with both dark cabinet colors and warm metal elements in the same space.
The Amerock Overton BP36683BMBBGL pull is made from zinc and aluminum, providing a metal construction suited to decorative cabinet hardware applications on doors and drawers.
The 1-1/8 in projection spaces the pull off the cabinet face so fingers can wrap behind the handle, supporting comfortable grip and reducing contact with finished door or drawer surfaces.
The 7-7/16 in overall length suits medium and larger cabinet fronts, providing leverage across wider doors and drawers while keeping proportions appropriate for standard residential cabinetry.
The Amerock Overton series BP36683BMBBGL pull combines a 6-5/16 in (160 mm) center-to-center layout with a 7-7/16 in overall length, giving installers clear drilling points and balanced proportions on medium to larger cabinet fronts. Its 1-1/8 in projection and 11/16 in width create practical clearances for daily use while keeping the hardware visually refined on the door or drawer face. The brushed matte black and brushed gold mixed finish helps coordinate across cabinets, lighting, and fixtures using similar tones. For cabinet projects specifying this size and finish combination, this zinc and aluminum Overton pull provides a defined, repeatable choice.
Sold In: 1 Each