Amerock Overton cabinet pull is a zinc and aluminum handle designed to bring the Overton collection look to cabinet fronts while using a durable metal construction that stands up to regular door and drawer use. The brushed gold and satin nickel mixed finish creates a split-finish appearance that visually ties together cabinets with nearby lighting, appliances, or plumbing fixtures finished in similar tones, helping one pull bridge multiple metals in the same room. The 6-5/16 in (160 mm) center-to-center dimension sets consistent handle spacing across doors and drawers, which matters when lining up multiple pulls in a run. A total length of 7-7/16 in gives comfortable hand clearance along the bar, supporting repeated opening and closing. A projection of 1-1/8 in sets the pull out from the face frame or door, giving fingers room behind the grip while keeping the profile tight to the cabinet face.
The 6-5/16 in (160 mm) center-to-center measurement on this Amerock Overton pull dictates the distance between mounting holes, which lets installers set up drilling templates for repeatable placement along cabinet runs. The 7-7/16 in length positions the grip beyond the hole centers, helpful when aligning multiple pulls so exposed bar ends line up cleanly from door to door. A 1-1/8 in projection defines how far the pull extends from the door or drawer face, which affects finger room behind the handle and clearance near adjacent walls or appliance panels. The 11/16 in width controls the front profile, giving a slim footprint that fits visually on narrow rails while still presenting enough surface to grasp comfortably.
The Overton collection designation ties this pull to a defined Amerock decorative hardware line, so it matches other Overton pieces where a coordinated look is required across cabinets. The 6-5/16 in (160 mm) center-to-center size suits mid-length cabinet doors and drawers, allowing two mounting points to land solidly in common stile and rail widths. At 7-7/16 in overall length, the pull spans more of the cabinet front, which helps visually balance larger fronts without overwhelming narrower faces. The brushed gold and satin nickel finish pairing allows the pull to sit comfortably between warm and cool metal tones, which is useful when cabinets sit near mixed-finish appliances or fixtures. With a 1-1/8 in projection, the handle stands off enough from the face to work on doors with decorative edge profiles while still keeping the hand close to the cabinet plane.
The specific 6-5/16 in center-to-center spacing gives a repeatable drilling reference, which supports straight handle rows over multiple doors and drawers and reduces rework during installation. The 7-7/16 in total length ensures that when mounting holes are laid out from door edges, the pull ends align visually from one cabinet front to the next, improving the overall hardware line. The 11/16 in width keeps the pull narrow enough to sit fully on standard rails, so edges do not overhang and the hardware looks proportional on framed and frameless cabinets. A projection of 1-1/8 in creates enough depth behind the pull for fingers without requiring deep door clearance, helping the handle work near adjacent cabinets where space is tight. The zinc and aluminum construction gives the pull a metal feel that holds the Overton profile crisp over time, which matters when matching multiple pulls across a high-visibility bank of cabinets.
This Amerock Overton cabinet pull has a 6-5/16 in (160 mm) center-to-center size, so drilling layouts can be set precisely for that hole spacing across cabinet doors and drawers.
The BP36683BGLG10 pull measures 7-7/16 in in overall length, giving extra bar length beyond the mounting holes for a comfortable grip and visual balance on the cabinet front.
This zinc and aluminum Overton pull projects 1-1/8 in from the cabinet face, providing finger clearance behind the handle while maintaining a relatively low-profile stance on the door or drawer.
The Amerock Overton 160mm pull has a width of 11/16 in across the front, which keeps the profile slim enough for standard cabinet rails while still offering a defined gripping surface.
This Overton collection cabinet handle uses a brushed gold and satin nickel finish combination, so it visually coordinates with both warm gold and cooler nickel fixtures in the same room.
This Amerock Overton pull is specified with 8-32 x 1-1/2 in screws, giving a standard machine screw thread and length commonly used for through-bore cabinet door and drawer fronts.
The Amerock Overton cabinet pull with 6-5/16 in (160 mm) center-to-center spacing, 7-7/16 in overall length, and 1-1/8 in projection offers defined mounting dimensions that support clean layouts on cabinet doors and drawers. Its brushed gold and satin nickel mixed finish gives one handle that visually links multiple metal tones in the same space, while the zinc and aluminum construction provides a solid metal body matched to the Overton collection style. Use these verified dimensions and finishes to align your cabinet hardware layout with surrounding fixtures and keep pulls consistent across the project.