Amerock Overton 224mm pull is a zinc and aluminum cabinet handle with an 8-13/16 inch (224 mm) center-to-center mount, giving installers a clear drilling layout for straightforward replacement or new cabinet work. The brushed matte black and brushed gold split finish creates a mixed-finish look that coordinates with contrasting fixtures, so a single pull can visually tie together lighting, appliances, and plumbing in the same run of cabinets. The 9-15/16 inch overall length brings the grip past the screw locations, which helps with leverage on taller doors or wider drawers. A projection of 1-1/8 inch sets the hand clearance away from the cabinet face, supporting comfortable use on doors with thicker edge profiles. The 11/16 inch width keeps the pull visually slim while still giving enough surface for a solid hand grip.
The 8-13/16 inch (224 mm) center-to-center mounting dimension sets a fixed hole spacing for this Amerock Overton pull, which is useful when matching or replacing existing hardware laid out on the same centers. With an overall length of 9-15/16 inch, the pull extends slightly past the mounting points on both sides, creating clear reference points for aligning multiple pulls along a cabinet run. A projection of 1-1/8 inch defines how far the pull stands off the door or drawer front, which affects finger clearance on thicker fronts and the apparent depth of the hardware line. The 11/16 inch width keeps the footprint narrow on the face, which can be helpful when working near panel edges, rail profiles, or narrow drawer fronts.
The Overton collection is inspired by farmhouse styling, so this Amerock pull fits cabinet layouts aiming for a clean, practical look rather than highly decorative hardware. The brushed matte black and brushed gold finishes work together so the same pull can sit beneath dark-framed appliances while also tying into warm-toned fixtures nearby. The 8-13/16 inch center-to-center spread suits wider drawers and taller doors where a longer handle helps balance the panel visually, giving hardware scale that matches the cabinet face. With a 9-15/16 inch overall length, the pull spans more of the drawer width, which helps users get a centered grip even on heavy or fully loaded drawers. The zinc and aluminum material construction supports use on frequently accessed cabinets, such as kitchen bases and tall pantry doors, where a metal pull is expected to handle repeated operation.
The fixed 224 mm center-to-center dimension on this Overton pull supports consistent hole drilling across a run of cabinets, which is especially helpful when laying out a grid on multiple banks of drawers. Because the product uses an 8-13/16 inch center-to-center specification, cabinet fronts can be laid out using that exact spacing when planning new jobs or matching other Overton pieces using the same dimension. The 9-15/16 inch overall length provides an easy visible reference for aligning edges or centering the pull on field-measured panel widths. With a projection of 1-1/8 inch, the pull extends just far enough off the face to clear door and drawer fronts while keeping hardware depth managed in tight galley runs. The 11/16 inch width concentrates the mass through a narrow bar, which can help maintain consistent sightlines when hardware is installed across rails with varying widths.
The Amerock Overton BP36684BMBBGL pull uses an 8-13/16 inch, or 224 mm, center-to-center dimension, which sets the drilling distance between mounting holes for replacements or new layouts.
The Overton 224mm pull has a 9-15/16 inch overall length, so it covers more drawer or door width and provides a larger gripping area on wider cabinet fronts.
The BP36684BMBBGL pull is made from zinc and aluminum, giving it a solid metal body suited to frequent opening and closing of cabinet doors and drawers.
This Amerock Overton pull has a 1-1/8 inch projection, setting the handle away from the cabinet face to create finger clearance while keeping the profile controlled.
The brushed matte black and brushed gold Overton pull is 11/16 inch wide, which keeps the hardware visually slim while still providing a defined surface to grasp.
This Amerock Overton series pull uses a brushed matte black and brushed gold split finish, allowing it to coordinate with both dark and warm metallic cabinet elements.
The Amerock Overton 224mm pull in brushed matte black and brushed gold offers a farmhouse-inspired profile with a clearly defined 8-13/16 inch center-to-center layout. The 9-15/16 inch overall length, 1-1/8 inch projection, and 11/16 inch width give installers a known footprint to plan cabinet fronts. Using the zinc and aluminum Amerock BP36684BMBBGL pull lets cabinet runs pick up a consistent mixed-finish detail that relates to both dark and warm-toned fixtures across the project.