Amerock Overton cabinet pull 224mm gives cabinets a farmhouse-inspired handle that pairs a brushed gold and satin nickel finish, so one pull can visually tie mixed metal fixtures together on a job. The Overton collection is inspired by farmhouse styling, which guides the profile toward a straightforward, designer look that suits many door and drawer fronts. The pull uses a mixed finish upgrade, combining brushed gold with satin nickel, so lighting, appliances, or plumbing fixtures in either tone can read as intentional. The center-to-center bore dimension of 8-13/16 in (224 mm) defines the mounting spread, which matters when laying out new drilling or matching to an existing long pull pattern. Overall length of 9-15/16 in positions this piece visually as a substantial handle, helping larger cabinet faces look proportionally balanced in the finished run.
The 8-13/16 in (224 mm) center-to-center dimension sets the exact distance between mounting holes, which simplifies layout when marking, drilling, and templating repeated cabinet fronts. With an overall length of 9-15/16 in, the pull extends slightly beyond the hole spread at each end, which helps hide minor drilling inconsistencies along a run. A projection of 1-1/8 in creates usable clearance behind the bar, giving fingers space while maintaining a low profile that stays close to the door or drawer front. Width of 11/16 in keeps the grip slim, allowing the pull to sit comfortably on narrow rails or stile faces without crowding edge details. The pull is specified as a cabinet handle in the decorative hardware category, so its dimensions are tuned to common cabinet front thicknesses and standard hardware layouts in typical woodworking projects.
The Amerock Overton series pull sits in the decorative hardware and moldings category as a handle and pull, so it slots naturally into cabinet, vanity, and built-in projects that call for visible hardware. Its farmhouse-inspired styling gives installers and designers a clear direction toward spaces that balance traditional shapes with mixed metal finishes. The brushed gold and satin nickel combination lets this pull visually connect gold-toned lighting or faucets with nickel-toned appliances in the same room, creating one continuous story across different trade scopes. With its 8-13/16 in (224 mm) center-to-center spread, the pull is well suited to wider drawers and taller cabinet doors where a longer handle feels proportional to the front size. The nearly 10 in overall length means a single pull can visually span more of the rail, which helps large faces feel finished without additional decorative elements.
The fixed 8-13/16 in (224 mm) center-to-center spacing on the Amerock Overton cabinet pull supports consistent hole layouts, making jigs or drilling templates straightforward to set and repeat across an entire kitchen or bank of casework. When replacing existing hardware with the same spread, the dimension lets installers reuse current drilling patterns, reducing surface repair work. The 9-15/16 in length gives a small margin beyond the bore centers at each end, which helps visually mask slight drilling variation when cabinets are viewed in a line. A projection of 1-1/8 in keeps the grip comfortably offset from the door or drawer front, improving hand access while maintaining a close profile that reduces the chance of catching clothing. The 11/16 in width offers enough face area to feel solid in the hand while staying narrow enough to sit cleanly on slim frame members or flat slab fronts without overwhelming the design.
The Amerock Overton cabinet pull uses an 8-13/16 in (224 mm) center-to-center measurement, which defines the drilling pattern for mounting on cabinet doors and drawers.
The Amerock Overton pull has a 9-15/16 in overall length, so it visually suits wider drawers and taller doors that benefit from a longer handle spanning more of the front.
The Overton pull uses a brushed gold and satin nickel finish combination, allowing one handle to coordinate with both gold-toned and nickel-toned fixtures in the same space.
The Amerock Overton pull is made from a zinc and aluminum material mix, giving it a metal construction suited to decorative cabinet hardware applications.
The Overton cabinet pull projects 1-1/8 in from the cabinet face, providing finger clearance while keeping the handle closer to the door or drawer surface.
The Amerock Overton pull has a width of 11/16 in, presenting a slim front profile that reads cleanly on narrow rails, stiles, or slab cabinet fronts.
The Amerock Overton cabinet pull 224mm pairs an 8-13/16 in (224 mm) center-to-center spread with an almost 10 in overall length, giving cabinet projects a long handle that fits wider fronts. Its brushed gold and satin nickel mixed finish lets the same pull serve as a bridge between gold-toned and nickel-toned fixtures, simplifying hardware decisions when metals vary across a room. With zinc and aluminum construction and dimensions tuned for cabinet applications, this pull from Wurth Baer Supply is positioned to support farmhouse-inspired installations that call for a visible, mixed-finish handle solution.