Amerock Urbanite cabinet pull is a zinc and aluminum handle designed for cabinet and furniture applications where a modern metal pull is required. The pull uses a 3-3/4 in (96 mm) center-to-center hole spacing, which matches many standard cabinet drilling patterns and simplifies layout on doors and drawers. Its overall 6-1/2 in length gives fingers a clear grab point across wider drawer fronts. The brushed gold and black chrome finish pairs two contrasting metallic tones, supporting projects that mix warm and cool metal finishes on the same run of cabinetry. A 1-3/16 in projection sets the hand away from the cabinet face, which helps fingers clear adjacent fronts during operation. The 1/2 in width keeps the pull visually slim while still presenting a defined edge for grip on frequently used doors and drawers.
The Amerock Urbanite Series pull uses a 3-3/4 in (96 mm) center-to-center mounting dimension, so the two mounting points are spaced for cabinets drilled to this standard. The 6-1/2 in overall length means the pull extends past the outer mounting points, which can align visually with rail or panel proportions on doors and drawers. With a projection of 1-3/16 in, the handle stands off the surface enough to allow a full finger grip between the pull and cabinet face. The 1/2 in width keeps the front profile narrow, useful when maintaining tight visual lines on contemporary cabinet runs. Base dimensions of 7/16 in length by 1/2 in width show the contact area at each mounting location, which supports layout decisions on narrow stiles.
The Amerock Urbanite Series 3-3/4 in (96 mm) center-to-center brushed gold and black chrome pull is positioned for cabinet and furniture doors or drawers that need a contemporary metal handle. The 3-3/4 in (96 mm) center-to-center spacing aligns with many cabinets drilled for standard pull layouts, making it suitable for new installations that follow common boring patterns. Its zinc and aluminum material composition gives a metal feel appropriate for residential or shop cabinetry where metal hardware is preferred over non-metal alternatives. The brushed gold and black chrome finish pairs warm and dark metallic tones, fitting projects that coordinate with both brass-toned and darker hardware elements on surrounding fixtures or appliances. With an overall 6-1/2 in length, the pull is proportioned for small to medium cabinet fronts where a full-length bar is not required but a noticeable handle presence is desired.
The defined 3-3/4 in (96 mm) center-to-center dimension on this Amerock Urbanite 96mm pull provides a precise spacing reference, which helps maintain consistent alignment across multiple doors and drawers in a run. The 8-32 x 1 in screw size specification ties the pull to a standard threaded connection, supporting predictable engagement into cabinet fronts drilled and tapped for this common hardware standard. A projection of 1-3/16 in establishes the distance the handle stands from the face, giving installers a fixed offset that helps align the pull plane relative to door thickness and adjacent components. The 1/2 in width and base dimensions of 7/16 in length by 1/2 in width define the visible and contact areas, supporting consistent positioning relative to stile edges or panel reveals. The combined brushed gold and black chrome finish remains constant across each pull, which helps maintain a uniform visual line when multiple pulls are mounted along a cabinet bank.
The Amerock Urbanite cabinet pull has a 3-3/4 in (96 mm) center-to-center dimension, so the mounting holes are spaced for layouts built around this common cabinet drilling standard.
The pull length is 6-1/2 in, which extends beyond the mounting holes and provides additional hand contact area on cabinet doors and drawers.
The Amerock Urbanite cabinet pull is made from zinc and aluminum, giving it a metal body suited to decorative cabinet and furniture hardware applications.
The pull uses a brushed gold and black chrome finish, combining a warm brushed tone with a darker chrome accent for two-tone cabinet hardware designs.
The Amerock Urbanite cabinet pull has a 1-3/16 in projection, providing finger clearance between the handle and cabinet face for regular opening and closing.
The Urbanite pull uses 8-32 x 1 in screws, aligning with standard cabinet pull threading for mounting through typical cabinet door and drawer front thicknesses.
The Amerock Urbanite Series BP77896BGLBCR pull combines a 3-3/4 in (96 mm) center-to-center spacing with a 6-1/2 in overall length, fitting projects built around standard drilling dimensions. Its zinc and aluminum construction with brushed gold and black chrome finish supports modern cabinet and furniture designs that use metal hardware as a visual element. With defined projection, width, and base dimensions, the pull offers clear sizing details for planning layouts across doors and drawers. Use these verified measurements and finish characteristics to align this Amerock Urbanite cabinet pull with cabinet runs that call for two-tone decorative hardware on a consistent 96 mm pattern.