Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Urbanite pull 96mm identifies this pull as part of Amerock Corporation's Urbanite collection with a 96 mm center-to-center, so it matches standard 3-3/4 in drilling on many cabinet doors and drawers for straightforward alignment. The zinc/aluminum material construction gives the pull a metal body that supports regular cabinet use in kitchens, baths, or built-ins. The polished chrome/white finish blends chrome and white surfaces, helping this pull coordinate with mixed-finish cabinet designs. The 6-1/2 in overall length spreads hand contact across a wider area, which can feel more stable on larger drawers. A 1-3/16 in projection sets the working clearance off the door or drawer face, creating finger space for gripping. The 1/2 in width offers a slim front profile, which can suit modern cabinet lines while remaining easy to grasp during everyday opening and closing.
The 3-3/4 in (96 mm) center-to-center spacing defines the hole layout for this Amerock Urbanite Series pull, so it suits cabinets drilled on that common spread. The 7/16 in long by 1/2 in wide base dimensions outline the contact area at each mounting point, which helps the pull sit flat against the cabinet surface. The 6-1/2 in overall length shows how much of the rail the pull covers, which matters when lining up multiple pulls across a run of doors or drawers. The 1-3/16 in projection defines how far the handle stands off the face, affecting grip comfort and clearance around adjacent faces or trim.
The 3-3/4 in (96 mm) center-to-center measurement on the Amerock Urbanite Series pull lines up with a standard drilling pattern on many cabinet systems, which is useful when replacing existing 3-3/4 in handles. The zinc/aluminum material supports use on kitchen, bath, or storage cabinetry where metal pulls are common, giving a consistent feel across different rooms. The polished chrome/white finish works on cabinets that combine metal fixtures and white or light-colored surfaces, tying together hinges, faucets, and painted fronts. The 6-1/2 in overall length makes this pull suited to doors and drawers with enough rail width to show some handle length, which can keep the hardware proportional on mid-size cabinets.
The 1/2 in width provides a slim profile on the face of the cabinet, supporting a cleaner look in projects where bulky hardware would crowd the design. The 7/16 in by 1/2 in base dimensions give each end a compact footprint, which can help when the pull is positioned near frame edges or narrow rails. The 1-3/16 in projection gives fingers room behind the bar on both doors and drawer fronts, which matters when users approach from the side or underneath. The Amerock Corporation branding and Urbanite collection naming connect this pull to a defined decorative hardware line, helping keep hardware consistent across multiple cabinet runs.
The defined 3-3/4 in (96 mm) center-to-center layout on the BP7789626WHT Amerock pull offers a repeatable drilling pattern, which can speed layout when installing multiple handles across a project. The clear 6-1/2 in length dimension helps with planning handle spacing on banks of drawers, so rails stay visually aligned from one cabinet to the next. The 1-3/16 in projection is fixed, which provides consistent hand clearance across every door and drawer using this pull, helping end users experience the same grip feel throughout the installation.
The 1/2 in width keeps every pull the same slim face profile, which can matter when aligning with other Amerock Urbanite pieces in the same space. The 7/16 in by 1/2 in base dimensions give a known bearing surface against the cabinet, supporting uniform contact when tightening each pull. The zinc/aluminum material keeps the body all metal, which supports a solid feel when users pull at different angles. The polished chrome/white finish stays consistent from pull to pull, which helps finished cabinet runs look uniform under different lighting conditions.
The Amerock Urbanite Series pull uses a 3-3/4 in (96 mm) center-to-center drilling pattern, which matches many existing cabinet hole layouts and supports straightforward replacement of same-size pulls.
The BP7789626WHT Amerock pull has a 6-1/2 in overall length, which helps it span a useful portion of cabinet doors or drawers and keeps hardware visually balanced on medium-width fronts.
This zinc/aluminum cabinet handle has a 1-3/16 in projection, setting the grip off the cabinet face to create finger clearance for opening doors and drawers from different angles.
The Amerock Urbanite cabinet pull is made from zinc/aluminum, giving it a metal body that supports everyday cabinet use in kitchen, bath, or storage installations.
This cabinet pull has a polished chrome/white finish, combining reflective chrome with white, which fits mixed-finish cabinet designs using both metal fixtures and light-colored fronts.
This Amerock pull has a 1/2 in width along the bar and base dimensions of 7/16 in long by 1/2 in wide, giving it a slim profile and compact mounting footprint on cabinet fronts.
The Amerock Urbanite Series 3-3/4 in (96 mm) center-to-center polished chrome/white pull BP7789626WHT offers a defined drilling pattern, metal zinc/aluminum construction, and a slim 6-1/2 in long form. These dimensions and the polished chrome/white finish help it coordinate with cabinets using standard 96 mm spreads and mixed metal-and-white design schemes. For cabinet projects that call for consistent feel, matching hardware across multiple doors and drawers, and a modern narrow-profile pull, this Amerock Urbanite cabinet pull provides the key measurements and finish to plan the layout and move ahead with installation.