Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Urbanite pull 128 mm describes a zinc and aluminum cabinet pull from Amerock Corporation in the Urbanite collection, so you get a decorative handle designed specifically for cabinet and furniture applications. The 5-1/16 in center-to-center drilling sets the hole spacing, which suits runs of doors and drawers laid out for 128 mm hardware. The 7-13/16 in overall length gives a longer hand grip than the boring size alone suggests, helping with consistent grab for larger doors. A 1-3/16 in projection sets how far the pull stands off the surface, leaving predictable clearance for fingers behind the handle. The 1/2 in width keeps the pull visually slim while still providing a defined edge to pull against on opening. Its 7/16 in by 1/2 in base dimensions define the footprint at each mounting point, which matters when aligning with door styles and rail widths.
The 5-1/16 in (128 mm) center-to-center measurement sets the hole spacing for this Amerock Urbanite Series pull, so drilling can follow a standard 128 mm layout across cabinet doors and drawers. The specified 8-32 x 1 in screw size describes the machine thread and length that mates to the pull, aligning with common cabinet door and drawer front thicknesses that accept 8-32 hardware. With a 7-13/16 in overall length, the handle extends past the mounting points, so its end-to-end reach can be positioned to line up with door edges or drawer proportions. A 1-3/16 in projection defines how far the grip stands off the face, providing a repeatable offset across a project. The 7/16 in by 1/2 in base dimensions mark the footprint at each mounting post, which is useful when positioning the pull on narrow rails or within panel details.
The Amerock Urbanite Series 5-1/16 in (128 mm) center-to-center brushed gold and white pull serves cabinet and furniture applications that call for a defined 128 mm boring. Its zinc and aluminum construction positions it within decorative hardware for interior woodworking projects where metal pulls are standard. The Brushed Gold / White finish combines a metallic look with a contrasting white element, so it suits doors and drawers where a two-tone pull supports the overall design direction. With a 7-13/16 in overall length, this pull spans more of the panel face than shorter options using the same drilling, which can help tie together wider drawers visually. The 1/2 in width keeps the bar profile lean, helping it sit comfortably on narrow frame members without crowding panel edges.
The defined 5-1/16 in (128 mm) center-to-center value on the Amerock BP778128BGLWHT pull lets installers set jigs or templates once, then repeat the same boring pattern across an entire kitchen or bank of casework. Its 8-32 x 1 in screw size aligns with a widely used machine thread, simplifying hardware selection when mounting through standard cabinet doors and drawers. The 1-3/16 in projection remains constant from unit to unit, which helps keep finger clearance and shadow lines uniform on aligned doors. A 7/16 in by 1/2 in base footprint at each post defines the contact area on the surface, supporting consistent placement relative to stile widths and rail heights. Because the overall length exceeds the center spacing, installers can center the handle on the boring while still achieving a longer apparent pull for better hand placement on taller or wider fronts.
The Amerock Urbanite Series BP778128BGLWHT pull uses a 5-1/16 in (128 mm) center-to-center drilling pattern, which fits layouts designed around the common 128 mm cabinet hardware spacing.
The BP778128BGLWHT pull has a stated length of 7-13/16 in, so it extends beyond the 128 mm mounting centers to provide a longer gripping area across the cabinet front.
The Amerock Urbanite BP778128BGLWHT pull is listed with a Material of Zinc / Aluminum, placing it in a non-ferrous metal family typical for decorative cabinet hardware.
The brushed gold and white Amerock Urbanite pull has a projection of 1-3/16 in, setting how far the handle stands off the cabinet surface for hand clearance.
The Amerock Urbanite BP778128BGLWHT pull uses 8-32 x 1 in screws, matching a common cabinet hardware machine thread and length for typical doors and drawer fronts.
The BP778128BGLWHT Urbanite pull is specified with a Brushed Gold / White finish, giving it a two-tone appearance suitable for coordinating with gold and white design elements.
The Amerock Urbanite Series BP778128BGLWHT pull combines a 5-1/16 in (128 mm) center-to-center drilling with a 7-13/16 in length, which fits projects laid out for 128 mm hardware that also benefit from a longer handle. Its Brushed Gold / White finish and 1/2 in bar width give a defined but slim profile across doors and drawers. The 1-3/16 in projection and 7/16 in by 1/2 in base dimensions provide consistent stand-off and footprint, supporting aligned runs of pulls. For cabinet and furniture installations using zinc and aluminum decorative hardware, this Amerock Urbanite pull offers a clearly defined set of dimensions and finish details to match project drawings.
Sold In: 1 Each