Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Urbanite cabinet pull in polished chrome/white gives a two-tone look that clearly defines the grip area and the mounting points, which helps with visual alignment across cabinet doors and drawers. The 5-1/16 in (128 mm) center-to-center dimension sets consistent spacing between mounting holes, so the pull lines up cleanly on standard cabinet layouts. Its zinc/aluminum material creates a solid metal feel at the hand contact points, supporting everyday use on frequently opened doors and drawers. The 7-13/16 in overall length spreads the visual weight across wider drawer fronts, helping the pull look proportionate on larger panels. A 1-3/16 in projection stands the handle off the face of the cabinet far enough for fingers to wrap behind, improving grip comfort. The 1/2 in width and 7/16 in by 1/2 in base dimensions define a compact footprint, which helps when working near door edges or tight reveals.
The 5-1/16 in (128 mm) center-to-center measurement defines exactly where mounting holes sit, giving a clear reference for drilling or checking existing fronts. Length or diameter listed as 7-13/16 in describes the overall handle span, which affects how far the pull visually reaches across a face. The 1-3/16 in projection indicates how far the pull stands off the cabinet, leaving working space for hands during use. A 1/2 in width sets the front-to-back bar dimension, helping gauge how the pull will look alongside trim or narrow drawer rails. Base dimensions of 7/16 in long by 1/2 in wide define the contact footprint at each mounting point, which matters when working close to panel edges or decorative routing.
This Amerock Corporation pull falls under decorative hardware handles and pulls, so it is suited to cabinet doors and drawers where a defined handhold is needed. The 5-1/16 in (128 mm) center-to-center spacing aligns with common cabinet drilling patterns, which works well on many residential and shop cabinet layouts designed for metric-based hardware. Its polished chrome/white finish adds a contrast band across the front, which can visually break up flat surfaces on painted or laminated casework. With a 7-13/16 in overall length, the BP77812826WHT pull fits especially well on medium-width drawers or doors where a shorter pull might look undersized. The zinc/aluminum body keeps the pull in the decorative hardware and moldings category while still serving as a functional handle for day-to-day operation.
The 128 mm center-to-center dimension on this Amerock Urbanite Series pull provides a repeatable standard when laying out multiple doors, which helps runs of cabinets stay aligned from handle to handle. The 1-3/16 in projection sets a known stand-off, so the same finger clearance is maintained across each installation point, creating a consistent feel from one cabinet to the next. A 1/2 in width keeps the gripping surface slim, which can ease alignment when setting the pull parallel to door edges or narrow stile faces. The 7/16 in by 1/2 in base dimensions define the footprint that contacts the door or drawer, which helps avoid interference with edge profiles or neighboring hardware. The polished chrome/white finish stays uniform across the pull, contributing to a tidy, repeatable appearance along long cabinet banks. The Amerock Corporation part number BP77812826WHT uniquely identifies this configuration, supporting repeat ordering when expanding or matching existing installations.
The Amerock Urbanite cabinet pull has a 5-1/16 in (128 mm) center-to-center size, which sets the hole spacing for doors and drawers and helps match standard drilling patterns.
The BP77812826WHT pull has a 7-13/16 in overall length, so the handle spans a good portion of medium-width fronts and creates a balanced visual on many cabinet faces.
This Amerock cabinet hardware handle has a 1-3/16 in projection, holding the bar away from the cabinet face to provide finger clearance during everyday opening and closing.
The Urbanite Series BP77812826WHT pull is made from zinc/aluminum, giving a metal construction that supports regular cabinet use in kitchens, baths, or shop storage.
This Amerock pull has a 1/2 in width, with base dimensions of 7/16 in long by 1/2 in wide, which defines a compact footprint at each mounting point.
The Amerock Urbanite Series pull uses a polished chrome/white finish, creating a two-tone look that stands out on many cabinet door and drawer colors.
The Amerock Urbanite Series 5-1/16 in (128 mm) center-to-center polished chrome/white pull BP77812826WHT combines defined dimensions with a two-tone finish, giving a repeatable standard for cabinet layouts. Use its 128 mm spacing, 7-13/16 in length, and 1-3/16 in projection to align doors and drawers across a project for consistent appearance and hand feel.
Sold In: 1 Each