Amerock Urbanite pull 128mm is a zinc and aluminum cabinet handle designed to give a clean, modern grip point on doors and drawers. The Urbanite collection identity ties this pull to a consistent style family, which helps when matching hardware across a project. The 5-1/16 inch center-to-center drilling aligns with common cabinet boring patterns, so this pull fits standard layouts on many face-frame and frameless jobs using that spread. Overall length of 7-13/16 inch gives enough bar length for a comfortable hand grasp across wider drawer fronts. A projection of 1-3/16 inch spaces fingers away from the surface, which reduces knuckle contact on deeper profiles. The 1/2 inch width provides a slim look while still offering a defined edge to pull against under load.
This Amerock Urbanite Series pull uses a 5-1/16 inch (128 mm) center-to-center measurement, which sets the distance between mounting holes for drilling or aligning with existing bores. The 8-32 x 1 inch screw size specification defines the thread and length used to fasten through typical cabinet doors and drawer fronts built in standard thickness ranges. A projection of 1-3/16 inch governs how far the pull stands off the face, which matters where doors open past adjacent panels or walls. The base dimension of 7/16 inch long by 1/2 inch wide describes each contact pad, which helps installers position the pull on narrow rails without overhanging edges.
The Amerock Urbanite Series designation places this BP77812826G10 pull within a decorative hardware family suited to cabinet and furniture fronts. The 5-1/16 inch center-to-center drilling matches drilling jigs designed around 128 mm spacing, which supports production runs on kitchen, bath, or office cabinetry using that standard. Its 7-13/16 inch overall length offers visual presence on taller doors and wider drawers, which helps this pull serve as a primary operating point on frequently used fronts. The polished chrome and satin nickel finish pairing lets the pull bridge between cooler stainless-style fixtures and brighter chrome elements, which is useful in mixed-metal design schemes. Zinc and aluminum material construction keeps the pull in the decorative hardware category commonly used on interior cabinetry.
The specified 8-32 x 1 inch screw size aligns with a common cabinet hardware thread, which supports straightforward through-bore fastening on many standard doors and drawer fronts using that fastener format. The 1-3/16 inch projection sets a predictable stand-off distance, which helps maintain uniform clearance behind every pull when lined across banks of doors. With base dimensions of 7/16 inch by 1/2 inch at each mounting point, the contact area is defined for layout against rail widths and stile edges, which helps maintain straight visual lines when repeating this model. The 1/2 inch bar width contributes to a slim profile while preserving a defined gripping edge, which can support a consistent feel from cabinet to cabinet. The combined polished chrome and satin nickel finish keeps the visible surfaces within a known Amerock finish description, which matters when tying this pull to other components specified with the same finish language.
The Amerock Urbanite pull has a 5-1/16 inch (128 mm) center-to-center, which sets the hole spacing for drilling or aligning with existing cabinet bores.
The BP77812826G10 pull has an overall length of 7-13/16 inch, which provides an extended grip area suited to many doors and drawer fronts.
This Urbanite pull projects 1-3/16 inch from the surface, which gives finger clearance between the hand and the cabinet front.
The pull uses a polished chrome and satin nickel finish combination, which creates a two-tone look that coordinates with both finish families.
The Urbanite pull is made from zinc and aluminum, which places it within common decorative cabinet hardware materials for interior use.
Each base on this pull measures 7/16 inch long by 1/2 inch wide, which defines the footprint that contacts the door or drawer surface.
The Amerock Urbanite pull 128mm combines a defined 5-1/16 inch center-to-center layout, 7-13/16 inch overall length, and 1-3/16 inch projection with a polished chrome and satin nickel finish on zinc and aluminum construction. These verified dimensions and materials give installers and shop teams a clear set of drilling, layout, and visual parameters when specifying BP77812826G10 across cabinet runs or matching it within the Urbanite collection on remodel and new-build projects.