Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Urbanite pull 128mm describes this Amerock Urbanite Series cabinet pull with a 5-1/16 in (128 mm) center-to-center hole spacing, which aligns with common drilling patterns so replacement or new layouts follow a straightforward mark-and-drill workflow. The pull length of 7-13/16 in provides a substantial gripping area along the front of a door or drawer, helping hands find the pull quickly in busy shop or kitchen environments. A projection of 1-3/16 in spaces the hand away from the cabinet face, supporting comfortable access while the door opens past adjacent fronts. The 1/2 in overall width keeps the profile visually lean, pairing easily with a range of cabinet styles without crowding narrow rails. Matching Matte Black / Matte Black finish across the pull creates a uniform appearance that can visually align multiple cabinets in the same run.
The center-to-center measurement of 5-1/16 in (128 mm) defines the distance between the mounting holes, so installers can rely on that exact spacing when drilling through cabinet doors or drawer fronts. The base dimensions of 7/16 in length by 1/2 in width for each foot define the footprint that contacts the cabinet surface, which helps with layout decisions near narrow rails or stiles. The overall length of 7-13/16 in determines how far the pull extends along the face, aiding positioning so ends do not interfere with neighboring hardware or edges. With a projection of 1-3/16 in, the pull stands off the surface enough to accommodate typical hand clearance while staying close enough to avoid catching on passing traffic in tight runs.
This Amerock Corporation Urbanite Series pull is categorized under Decorative Hardware & Moldings and Handles and Pulls, positioning it for cabinet and furniture applications where a defined gripping point is needed. The 5-1/16 in (128 mm) center-to-center layout aligns with common cabinet boring patterns, so it fits well on kitchen, bath, or casework fronts sized for this spacing. Its 7-13/16 in length suits wider drawer fronts and taller doors where a longer pull visually balances the face and provides an accessible hand position along the opening edge. The Matte Black / Matte Black finish allows the pull to blend into dark fronts or stand out against lighter surfaces, supporting design choices that call for consistent matte black decorative hardware across a project. The zinc/aluminum construction positions it for interior use on cabinets and similar casework where a metal pull is preferred for frequent opening cycles.
The fixed 5-1/16 in (128 mm) center-to-center spacing gives installers a precise drilling target, which supports the use of templates or jigs to repeat the same layout across multiple doors and drawers. The 7/16 in by 1/2 in base dimensions at each end define how much flat surface is required around each mounting point, helping avoid overhanging onto edge profiles or decorative details. A projection of 1-3/16 in establishes a consistent standoff from the cabinet face, contributing to uniform hardware lines when this pull is used throughout a room. The 1/2 in width keeps the pull visually slim while still giving a defined gripping edge, which matters when spacing multiple handles along a bank of drawers. The Matte Black / Matte Black finish promotes consistent color across each pull, supporting visual continuity when many units are installed side by side. The Amerock Corporation manufacturer part number BP778128MBMB provides an exact identifier for reordering the same component when expanding or matching existing installations.
The Amerock Urbanite pull uses a 5-1/16 in (128 mm) center-to-center dimension, so installers position holes at that exact spacing to align the feet and secure the handle.
The Amerock BP778128MBMB pull has a length of 7-13/16 in, spanning a wider area on the face to provide more contact and visual presence on doors or drawers.
This Urbanite Series pull is made from zinc/aluminum, giving it a metal construction that supports a solid feel when gripping cabinet doors and drawers.
The Urbanite pull has a projection of 1-3/16 in, which spaces the grip off the cabinet face to allow typical finger clearance during everyday use.
This cabinet handle has a Matte Black / Matte Black finish, providing a consistent dark appearance that coordinates with other matte black decorative hardware.
The Urbanite pull has a width of 1/2 in, creating a slim profile that still defines a clear gripping edge across the cabinet front.
The Amerock Urbanite Series 5-1/16 in (128 mm) center-to-center Matte Black / Matte Black pull BP778128MBMB combines a defined drilling pattern, 7-13/16 in length, and 1-3/16 in projection to support consistent cabinet layouts. The zinc/aluminum construction and 1/2 in width create a slim metal profile suited to doors and drawers that see regular use. When a project calls for a matte black handle within the Urbanite collection, this pull provides a specific size and appearance that can be repeated across multiple fronts for uniform results.
Sold In: 1 Each